P00A6 – BMW DTC

BMW DTC P00A6 – Intake Air Temperature Sensor 2 Circuit Range/Performance (Bank 2)

DTC P00A6 meaning on BMW

The DTC P00A6 code on a BMW indicates an issue with the Intake Air Temperature Sensor 2 Circuit Range/Performance on Bank 2. This means that the Engine Control Module (ECM) has detected a discrepancy in the intake air temperature sensor readings for the second bank of cylinders.

BMW DTC P00A6 symptoms

Symptoms of the DTC P00A6 code on a BMW may include:

• Check Engine Light illuminated
• Reduced engine performance
• Poor fuel efficiency
• Rough idling or stalling

BMW DTC P00A6 causes

Common causes of the DTC P00A6 code on a BMW include:

• Faulty intake air temperature sensor
• Wiring or connector issues in the intake air temperature sensor circuit
• ECM software or hardware problems

BMW DTC P00A6 seriousness

While the DTC P00A6 code may not cause immediate drivability issues, it can lead to reduced engine performance and fuel efficiency if left unresolved. Ignoring this code may also result in potential damage to other engine components over time.

How to diagnose DTC P00A6 on BMW

To diagnose the DTC P00A6 code on a BMW, you can follow these steps:

1. Use an OBD-II scanner to retrieve the fault codes and freeze frame data.
2. Inspect the intake air temperature sensor and its wiring for any visible damage or corrosion.
3. Check the sensor’s resistance and voltage readings using a multimeter.
4. Perform a visual inspection of the intake air temperature sensor circuit for any loose connections or shorts.

How to fix DTC P00A6 on BMW

To fix the DTC P00A6 code on a BMW, you can try the following solutions:

1. Replace the faulty intake air temperature sensor.
2. Repair or replace any damaged wiring or connectors in the sensor circuit.
3. Clear the fault codes and reset the ECM by disconnecting the battery for a few minutes.
4. If the issue persists, seek professional help for further diagnosis and repair.

How to erase DTC P00A6 on BMW

To erase the DTC P00A6 code on a BMW, you can:

1. Use an OBD-II scanner to clear the fault codes stored in the ECM.
2. Alternatively, disconnect the battery for a few minutes to reset the ECM and clear the codes.
3. After clearing the codes, monitor the vehicle for any recurring issues.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.