P00AA – BMW DTC

BMW DTC P00AA – Intake Air Temperature Sensor 1 Circuit (Bank 2)

DTC P00AA meaning on BMW

DTC P00AA indicates a fault with the Intake Air Temperature Sensor 1 Circuit on Bank 2 in a BMW vehicle. This diagnostic trouble code (DTC) specifically relates to an issue with the intake air temperature sensor located in Bank 2 of the engine.

BMW DTC P00AA symptoms

Symptoms of DTC P00AA in a BMW may include:

• Check Engine Light illuminated on the dashboard
• Reduced engine performance or power
• Potential decrease in fuel efficiency
• Engine running rough or stalling

BMW DTC P00AA causes

Common causes of DTC P00AA in a BMW include:

• Faulty intake air temperature sensor
• Wiring or connector issues in the intake air temperature sensor circuit
• Engine control module (ECM) software or hardware problems

BMW DTC P00AA seriousness

While DTC P00AA may not always result in immediate drivability issues, it is important to address this fault promptly to prevent potential engine performance problems and ensure optimal fuel efficiency.

How to diagnose DTC P00AA on BMW

To diagnose DTC P00AA on a BMW, follow these steps:

1. Use an OBD-II scanner to retrieve the specific fault code.
2. Inspect the intake air temperature sensor and its wiring for any visible damage or corrosion.
3. Check the sensor’s resistance and compare it to specifications using a multimeter.
4. Perform a thorough visual inspection of the sensor’s connector and surrounding components.
5. Consult the vehicle’s service manual for additional diagnostic procedures specific to your BMW model.

How to fix DTC P00AA on BMW

To fix DTC P00AA on a BMW, consider the following steps:

1. Replace the faulty intake air temperature sensor if it is determined to be the cause of the issue.
2. Repair or replace any damaged wiring or connectors in the sensor circuit.
3. Clear the fault code using an OBD-II scanner after completing the repairs.
4. Perform a test drive to ensure the issue has been resolved and the Check Engine Light does not reappear.

How to erase DTC P00AA on BMW

To erase DTC P00AA on a BMW, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Access the scanner’s menu to clear the stored fault codes.
3. Confirm the deletion of the DTC P00AA code and ensure no other codes are present.
4. Disconnect the scanner and start the vehicle to verify that the Check Engine Light is no longer illuminated.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.