P00AC – BMW DTC

BMW DTC P00AC – Intake Air Temperature Sensor 1 Circuit Low (Bank 2)

DTC P00AC meaning on BMW

DTC P00AC indicates a fault with the Intake Air Temperature Sensor 1 Circuit on Bank 2 in a BMW vehicle. This fault code is triggered when the Engine Control Module (ECM) detects a low voltage signal from the intake air temperature sensor.

BMW DTC P00AC symptoms

Symptoms of DTC P00AC in a BMW may include:

• Check Engine Light illuminated
• Reduced engine performance
• Poor fuel efficiency
• Rough idling or stalling

BMW DTC P00AC causes

Common causes of DTC P00AC in a BMW include:

• Faulty intake air temperature sensor
• Wiring or connector issues in the intake air temperature sensor circuit
• ECM software or hardware issues

BMW DTC P00AC seriousness

While DTC P00AC may not cause immediate drivability issues, it can lead to reduced engine performance and fuel efficiency. Ignoring this fault code may result in further damage to the engine over time.

How to diagnose DTC P00AC on BMW

To diagnose DTC P00AC on a BMW, you can perform the following steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the ECM.
2. Inspect the intake air temperature sensor and its wiring for any visible damage or corrosion.
3. Test the intake air temperature sensor using a multimeter to check for proper resistance values.
4. Check the ECM for any software updates or reprogramming that may be required.

How to fix DTC P00AC on BMW

To fix DTC P00AC on a BMW, you can try the following solutions:

1. Replace the faulty intake air temperature sensor with a new one.
2. Repair any damaged wiring or connectors in the intake air temperature sensor circuit.
3. If necessary, update the ECM software to the latest version.

How to erase DTC P00AC on BMW

To erase DTC P00AC on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the ECM. After fixing the underlying issue causing the fault code, clearing the codes will reset the Check Engine Light and monitor the system for any new faults.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.