P00B6 – BMW DTC

BMW DTC P00B6 – Radiator Coolant Temperature / Engine Coolant Temperature Correlation

DTC P00B6 meaning on BMW

The DTC P00B6 fault code on BMW vehicles indicates a discrepancy between the readings of the Radiator Coolant Temperature (RCT) sensor and the Engine Coolant Temperature (ECT) sensor. This means that the Engine Control Module (ECM) has detected that the temperatures reported by these two sensors do not match, suggesting a potential issue with the cooling system.

BMW DTC P00B6 symptoms

Some common symptoms associated with the BMW DTC P00B6 fault code may include:

• Engine overheating
• Decreased fuel efficiency
• Check Engine Light (CEL) illuminated on the dashboard
• Reduced engine performance

BMW DTC P00B6 causes

The discrepancy between the Radiator Coolant Temperature and Engine Coolant Temperature sensors, leading to the DTC P00B6 fault code, can be caused by various factors, including:

• Defective coolant temperature sensors
• Wiring or connector issues in the coolant temperature sensor circuit
• Cooling system leaks or blockages
• Malfunctioning Engine Control Module (ECM)

BMW DTC P00B6 seriousness

Ignoring the DTC P00B6 fault code on a BMW can lead to serious consequences such as engine overheating, potential damage to engine components, and reduced overall vehicle performance. It is crucial to address this issue promptly to prevent further damage and ensure the proper functioning of the cooling system.

How to diagnose DTC P00B6 on BMW

To diagnose the DTC P00B6 fault code on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and freeze frame data
2. Inspect the coolant temperature sensors and their wiring for any visible damage or corrosion
3. Check the cooling system for leaks or blockages
4. Test the operation of the coolant temperature sensors using a multimeter
5. Verify the correlation between the Radiator Coolant Temperature and Engine Coolant Temperature readings

How to fix DTC P00B6 on BMW

Depending on the root cause of the DTC P00B6 fault code, the following steps may be taken to fix the issue:

• Replace faulty coolant temperature sensors
• Repair or replace damaged wiring or connectors in the sensor circuit
• Address any leaks or blockages in the cooling system
• Reset the Engine Control Module (ECM) and clear the fault code

How to erase DTC P00B6 on BMW

To erase the DTC P00B6 fault code on a BMW, the following steps can be taken:

1. Use a diagnostic scanner to clear the fault code from the ECM memory
2. Ensure that the underlying issue causing the fault code has been resolved
3. Perform a test drive to confirm that the fault code does not reappear

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.