BMW DTC P00C2 – Turbocharger/Supercharger Bypass Valve ‘B’ Control Circuit High
DTC P00C2 meaning on BMW
The DTC P00C2 code on a BMW indicates a fault with the Turbocharger/Supercharger Bypass Valve ‘B’ Control Circuit High. This means that the engine control module (ECM) has detected a high voltage condition in the control circuit of the bypass valve ‘B’ for the turbocharger or supercharger system.
BMW DTC P00C2 symptoms
Symptoms of the DTC P00C2 code on a BMW may include reduced engine performance, decreased fuel efficiency, hesitation or surging during acceleration, and in some cases, the vehicle may go into a limp mode to prevent further damage.
BMW DTC P00C2 causes
The most common causes of the DTC P00C2 code on a BMW are a faulty turbocharger/supercharger bypass valve ‘B’, a short or open circuit in the control wiring, a malfunctioning engine control module (ECM), or a poor electrical connection in the circuit.
BMW DTC P00C2 seriousness
While the DTC P00C2 code may not cause immediate harm to the vehicle, it is important to address the issue promptly to prevent further damage to the turbocharger or supercharger system. Ignoring this fault can lead to more severe engine problems and potentially costly repairs.
How to diagnose DTC P00C2 on BMW
To diagnose the DTC P00C2 code on a BMW, a mechanic would typically start by using a diagnostic scanner to retrieve the fault codes stored in the ECM. They would then inspect the turbocharger/supercharger bypass valve ‘B’ and its control circuit for any visible damage or loose connections. Testing the electrical components and wiring using a multimeter may also be necessary to pinpoint the exact cause of the fault.
How to fix DTC P00C2 on BMW
Fixing the DTC P00C2 code on a BMW usually involves replacing the faulty turbocharger/supercharger bypass valve ‘B’ if it is determined to be the cause of the high voltage condition. Additionally, repairing any damaged wiring or connectors in the control circuit and ensuring proper electrical connections can help resolve the issue. It is recommended to follow the manufacturer’s diagnostic and repair procedures to address the fault effectively.
How to erase DTC P00C2 on BMW
To erase the DTC P00C2 code on a BMW, a diagnostic scanner capable of clearing fault codes is typically used. After the necessary repairs have been made to address the underlying issue, the mechanic can use the scanner to reset the ECM and clear the fault code. It is important to verify that the repair was successful by performing a test drive and re-scanning the vehicle to ensure the fault code does not return.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.