BMW DTC P00C5 – Turbocharger/Supercharger ‘B’ Turbine Overspeed
DTC P00C5 meaning on BMW
The DTC P00C5 code on a BMW indicates an issue with the Turbocharger/Supercharger ‘B’ Turbine Overspeed. This means that the turbine in the turbocharger or supercharger is spinning at a speed higher than the specified limit.
BMW DTC P00C5 symptoms
Symptoms of the DTC P00C5 code on a BMW may include reduced engine power, engine knocking or pinging noises, excessive exhaust smoke, and in some cases, the vehicle may go into a limp mode to prevent further damage.
BMW DTC P00C5 causes
The common causes of the DTC P00C5 code on a BMW include a malfunctioning wastegate, a stuck open wastegate, a faulty turbocharger or supercharger, a boost leak in the intake system, or a problem with the engine control module (ECM).
BMW DTC P00C5 seriousness
The DTC P00C5 code should be taken seriously as it can lead to engine damage if not addressed promptly. Driving with an overspeeding turbocharger or supercharger can cause excessive wear on engine components and potentially lead to a catastrophic failure.
How to diagnose DTC P00C5 on BMW
To diagnose the DTC P00C5 code on a BMW, a mechanic would typically start by using a diagnostic scanner to retrieve the fault codes stored in the ECM. They would then inspect the turbocharger/supercharger system for any visible signs of damage, check for boost leaks, test the wastegate operation, and perform a thorough inspection of the intake system.
How to fix DTC P00C5 on BMW
Fixing the DTC P00C5 code on a BMW may involve repairing or replacing the wastegate, turbocharger, or supercharger components, fixing any boost leaks in the intake system, and ensuring proper operation of the engine control module. It is recommended to follow the manufacturer’s diagnostic and repair procedures to address the issue effectively.
How to erase DTC P00C5 on BMW
To erase the DTC P00C5 code on a BMW, a mechanic can use a diagnostic scanner to clear the fault codes stored in the ECM. However, it is important to note that simply clearing the code without addressing the underlying issue may result in the code reappearing. It is crucial to diagnose and fix the root cause of the problem before clearing the fault code.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.