P00E7 – BMW DTC

BMW DTC P00E7 – Intake Air Temperature Measurement System – Multiple Sensor Correlation Bank 2

DTC P00E7 meaning on BMW

The DTC P00E7 fault code on a BMW indicates an issue with the Intake Air Temperature Measurement System – Multiple Sensor Correlation Bank 2. This means that there is a discrepancy between the readings from the intake air temperature sensors in Bank 2, which can affect the engine’s performance and fuel efficiency.

BMW DTC P00E7 symptoms

Symptoms of the BMW DTC P00E7 code may include:

• Check Engine Light illuminated
• Reduced engine performance
• Poor fuel efficiency
• Rough idling or stalling

BMW DTC P00E7 causes

Common causes of the BMW DTC P00E7 fault code include:

• Faulty intake air temperature sensors
• Wiring or connector issues in the intake air temperature sensor circuit
• Intake air leaks
• Engine control module (ECM) software issues

BMW DTC P00E7 seriousness

The DTC P00E7 fault code should not be ignored as it can lead to poor engine performance, reduced fuel efficiency, and potential drivability issues. It is recommended to address this issue promptly to prevent further damage to the vehicle.

How to diagnose DTC P00E7 on BMW

To diagnose the DTC P00E7 code on a BMW, a mechanic may perform the following steps:

1. Use a diagnostic scanner to retrieve the fault codes and freeze frame data
2. Inspect the intake air temperature sensors in Bank 2 for any visible damage or corrosion
3. Check the wiring and connectors in the intake air temperature sensor circuit for any issues
4. Perform a smoke test to check for intake air leaks
5. Test the intake air temperature sensors using a multimeter

How to fix DTC P00E7 on BMW

To fix the DTC P00E7 fault code on a BMW, the following steps may be taken:

1. Replace any faulty intake air temperature sensors in Bank 2
2. Repair or replace any damaged wiring or connectors in the intake air temperature sensor circuit
3. Address any intake air leaks by replacing gaskets or seals
4. Update the engine control module (ECM) software if necessary

How to erase DTC P00E7 on BMW

To erase the DTC P00E7 fault code on a BMW, the following steps can be followed:

1. Use a diagnostic scanner to clear the fault codes from the ECM memory
2. After clearing the codes, perform a test drive to ensure the issue has been resolved
3. If the fault code reappears, further diagnosis and repairs may be necessary

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.