P011E – BMW DTC

BMW DTC P011E – Engine Coolant Temperature 1 / Ambient Air Temperature Correlation

DTC P011E meaning on BMW

The DTC P011E code on a BMW indicates an issue with the correlation between the Engine Coolant Temperature (ECT) sensor 1 and the Ambient Air Temperature (AAT) sensor. This means that the Engine Control Module (ECM) has detected a discrepancy between the two sensor readings, which can affect the engine’s performance and efficiency.

BMW DTC P011E symptoms

Symptoms of the DTC P011E code on a BMW may include:

• Check Engine Light illuminated
• Engine running rough or misfiring
• Decreased fuel efficiency
• Engine overheating or running too cold

BMW DTC P011E causes

Common causes of the DTC P011E code on a BMW include:

• Faulty Engine Coolant Temperature (ECT) sensor
• Malfunctioning Ambient Air Temperature (AAT) sensor
• Wiring or connector issues in the sensor circuit
• ECM software or hardware problems

BMW DTC P011E seriousness

The DTC P011E code should not be ignored as it can lead to engine performance issues and potential damage if left unresolved. It is important to address this code promptly to prevent further complications.

How to diagnose DTC P011E on BMW

To diagnose the DTC P011E code on a BMW, you can follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the ECM.
2. Inspect the Engine Coolant Temperature (ECT) sensor and Ambient Air Temperature (AAT) sensor for any visible damage or corrosion.
3. Check the wiring and connectors associated with the sensors for any loose connections or breaks.
4. Perform a resistance test on the sensors to ensure they are within specifications.
5. If necessary, test the ECM for proper operation.

How to fix DTC P011E on BMW

To fix the DTC P011E code on a BMW, you can try the following solutions:

1. Replace the faulty Engine Coolant Temperature (ECT) sensor or Ambient Air Temperature (AAT) sensor.
2. Repair or replace any damaged wiring or connectors in the sensor circuit.
3. Clear the fault codes using a diagnostic scanner after making the necessary repairs.
4. If the issue persists, consult a professional mechanic for further diagnosis and repair.

How to erase DTC P011E on BMW

To erase the DTC P011E code on a BMW, you can follow these steps:

1. Use a diagnostic scanner to access the ECM and clear the fault codes.
2. Ensure that the underlying issue causing the code has been resolved before clearing the codes.
3. Once the codes are cleared, monitor the vehicle for any reoccurrence of the DTC P011E code.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.