P012E – BMW DTC

BMW DTC P012E – Turbocharger/Supercharger Inlet Pressure Sensor ‘A’ Circuit Intermittent/Erratic

DTC P012E meaning on BMW

The DTC P012E code on a BMW indicates an intermittent or erratic signal from the Turbocharger/Supercharger Inlet Pressure Sensor ‘A’ circuit. This sensor is responsible for monitoring the pressure of the air entering the turbocharger or supercharger, providing crucial data for the engine control module to adjust fuel delivery and boost pressure.

BMW DTC P012E symptoms

Symptoms of a DTC P012E on a BMW may include:

• Check Engine Light (CEL) illuminated
• Reduced engine performance
• Decreased fuel efficiency
• Engine stalling or hesitation
• Increased turbo lag

BMW DTC P012E causes

Common causes of a DTC P012E on a BMW include:

• Faulty Turbocharger/Supercharger Inlet Pressure Sensor ‘A’
• Wiring or connector issues in the sensor circuit
• Intermittent electrical connection problems
• Software glitches in the engine control module

BMW DTC P012E seriousness

Ignoring a DTC P012E on a BMW can lead to potential engine performance issues and decreased fuel efficiency. It is important to address this code promptly to prevent further damage to the engine components.

How to diagnose DTC P012E on BMW

To diagnose a DTC P012E on a BMW, you can follow these steps:

1. Use a diagnostic scanner to retrieve the fault code and freeze frame data
2. Inspect the Turbocharger/Supercharger Inlet Pressure Sensor ‘A’ and its wiring for any visible damage
3. Perform a thorough visual inspection of the sensor circuit components
4. Test the sensor using a multimeter to check for proper voltage and resistance
5. Check for any loose or corroded connections in the sensor circuit

How to fix DTC P012E on BMW

To fix a DTC P012E on a BMW, you can try the following solutions:

1. Replace the Turbocharger/Supercharger Inlet Pressure Sensor ‘A’ if it is found to be faulty
2. Repair or replace any damaged wiring or connectors in the sensor circuit
3. Clean any corrosion from the sensor connections
4. Reset the engine control module and clear the fault code
5. Perform a test drive to ensure the issue has been resolved

How to erase DTC P012E on BMW

To erase a DTC P012E on a BMW, you can use a diagnostic scanner to clear the fault code from the engine control module’s memory. Once the code is cleared, you can perform a test drive to verify that the issue has been resolved and the Check Engine Light is no longer illuminated.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.