BMW DTC P0130 – O2 Sensor Circuit (Bank 1 Sensor 1)
DTC P0130 meaning on BMW
The DTC P0130 code on a BMW indicates an issue with the O2 sensor circuit for Bank 1 Sensor 1. This sensor is responsible for monitoring the oxygen levels in the exhaust gases and providing feedback to the engine control module (ECM) for proper air-fuel ratio adjustments.
BMW DTC P0130 symptoms
Symptoms of a DTC P0130 on a BMW may include:
- Check Engine Light (CEL) illuminated on the dashboard
- Poor fuel economy
- Rough idling or stalling
- Decreased engine performance
BMW DTC P0130 causes
Common causes of a DTC P0130 on a BMW include:
- Failed O2 sensor
- Wiring or connector issues in the O2 sensor circuit
- Exhaust system leaks
- Engine running too rich or too lean
BMW DTC P0130 seriousness
Ignoring a DTC P0130 on a BMW can lead to potential engine damage and decreased fuel efficiency. It is important to address this issue promptly to prevent further complications.
How to diagnose DTC P0130 on BMW
To diagnose a DTC P0130 on a BMW, you can perform the following steps:
- Use an OBD-II scanner to retrieve the fault code and verify the issue.
- Inspect the O2 sensor wiring and connectors for any damage or corrosion.
- Check for exhaust leaks that may affect O2 sensor readings.
- Test the O2 sensor using a multimeter to ensure proper functionality.
How to fix DTC P0130 on BMW
To fix a DTC P0130 on a BMW, you can try the following solutions:
- Replace the faulty O2 sensor with a new one.
- Repair any damaged wiring or connectors in the O2 sensor circuit.
- Fix any exhaust leaks that may be affecting sensor readings.
- Ensure the engine is running at the correct air-fuel ratio.
How to erase DTC P0130 on BMW
To erase a DTC P0130 on a BMW, you can use an OBD-II scanner to clear the fault code from the ECM’s memory. After fixing the underlying issue, clearing the code will reset the Check Engine Light and monitor the system for any recurring problems.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.