BMW DTC P0145 – O2 Sensor Circuit Slow Response (Bank 1 Sensor 3)
DTC P0145 meaning on BMW
The Diagnostic Trouble Code (DTC) P0145 for BMW refers to the O2 Sensor Circuit Slow Response on Bank 1 Sensor 3. This code indicates that the oxygen sensor located in the third position on the first bank of the engine is not responding as quickly as expected by the Engine Control Module (ECM).
BMW DTC P0145 symptoms
Symptoms of DTC P0145 on a BMW may include:
- Check Engine Light illuminated on the dashboard
- Poor fuel economy
- Engine running rough or misfiring
- Reduced engine performance
BMW DTC P0145 causes
Common causes of DTC P0145 on a BMW include:
- Failed oxygen sensor
- Wiring or connector issues in the O2 sensor circuit
- Exhaust leaks near the sensor
- Engine running rich or lean
BMW DTC P0145 seriousness
While DTC P0145 may not cause immediate drivability issues, it can lead to poor engine performance and reduced fuel efficiency if left unresolved. Ignoring this code may also result in damage to other components of the vehicle over time.
How to diagnose DTC P0145 on BMW
To diagnose DTC P0145 on a BMW, a mechanic may perform the following steps:
- Use a scan tool to retrieve the fault code and freeze frame data
- Inspect the wiring and connectors of the Bank 1 Sensor 3 oxygen sensor
- Check for exhaust leaks near the sensor
- Test the oxygen sensor’s response time using a multimeter
How to fix DTC P0145 on BMW
To fix DTC P0145 on a BMW, the following steps may be taken:
- Replace the Bank 1 Sensor 3 oxygen sensor if it is found to be faulty
- Repair any damaged wiring or connectors in the O2 sensor circuit
- Address any exhaust leaks near the sensor
- Clear the fault code and perform a test drive to ensure the issue is resolved
How to erase DTC P0145 on BMW
To erase DTC P0145 on a BMW, the fault code can be cleared using a scan tool. After the repair has been completed and the issue resolved, the code can be cleared to turn off the Check Engine Light. It is important to ensure that the underlying issue causing the fault code has been addressed before clearing it.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.