P0153 – BMW DTC

BMW DTC P0153 – O2 Sensor Circuit Slow Response (Bank 2 Sensor 1)

DTC P0153 meaning on BMW

The Diagnostic Trouble Code (DTC) P0153 for BMW indicates an issue with the O2 Sensor Circuit Slow Response on Bank 2 Sensor 1. This means that the oxygen sensor located in the exhaust system of the vehicle, specifically on the side of the engine where cylinder 2 is located, is not responding as quickly as expected by the Engine Control Module (ECM).

BMW DTC P0153 symptoms

Symptoms of DTC P0153 on a BMW may include:

• Check Engine Light illuminated on the dashboard
• Poor fuel economy
• Rough idling or engine misfires
• Reduced engine performance

BMW DTC P0153 causes

Common causes of DTC P0153 on a BMW include:

• Failed O2 sensor on Bank 2 Sensor 1
• Wiring or connector issues in the O2 sensor circuit
• Exhaust leaks near the O2 sensor
• Engine running too rich or too lean

BMW DTC P0153 seriousness

While DTC P0153 may not cause immediate drivability issues, it can lead to poor fuel efficiency and potentially cause damage to the catalytic converter over time if left unresolved. It is recommended to address this issue promptly to prevent further complications.

How to diagnose DTC P0153 on BMW

To diagnose DTC P0153 on a BMW, you can perform the following steps:

1. Use an OBD-II scanner to retrieve the specific fault code
2. Inspect the wiring and connectors related to Bank 2 Sensor 1
3. Check for exhaust leaks near the O2 sensor
4. Test the O2 sensor’s response time using a multimeter or scan tool

How to fix DTC P0153 on BMW

To fix DTC P0153 on a BMW, you can try the following solutions:

1. Replace the O2 sensor on Bank 2 Sensor 1
2. Repair any damaged wiring or connectors in the O2 sensor circuit
3. Address any exhaust leaks near the O2 sensor
4. Ensure the engine is running at the correct air-fuel ratio

How to erase DTC P0153 on BMW

To erase DTC P0153 on a BMW, you can clear the fault code using an OBD-II scanner or by disconnecting the vehicle’s battery for a few minutes. However, it is important to address the underlying issue causing the fault code before clearing it to prevent it from reoccurring.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.