P0168 – BMW DTC

BMW DTC P0168 – Fuel Temperature Too High

DTC P0168 meaning on BMW

The Diagnostic Trouble Code (DTC) P0168 on a BMW indicates that the fuel temperature is too high. This code is triggered when the Engine Control Module (ECM) detects that the fuel temperature exceeds the specified threshold.

BMW DTC P0168 symptoms

Symptoms associated with DTC P0168 on a BMW may include:

• Decreased fuel efficiency
• Engine knocking or pinging
• Engine misfires
• Check Engine Light (CEL) illuminated on the dashboard

BMW DTC P0168 causes

The common causes of DTC P0168 on a BMW are:

• Malfunctioning fuel temperature sensor
• Issues with the fuel temperature sensor circuit
• High ambient temperatures affecting fuel temperature readings

BMW DTC P0168 seriousness

While DTC P0168 may not cause immediate harm to the vehicle, it can lead to decreased fuel efficiency and potential engine performance issues if left unresolved. It is recommended to address this code promptly to prevent further complications.

How to diagnose DTC P0168 on BMW

To diagnose DTC P0168 on a BMW, you can follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the ECM.
2. Inspect the fuel temperature sensor and its wiring for any visible damage or corrosion.
3. Check the fuel temperature sensor readings using a multimeter to ensure it is within specifications.
4. Perform a visual inspection of the fuel system components for any signs of leaks or damage.

How to fix DTC P0168 on BMW

To fix DTC P0168 on a BMW, you can try the following solutions:

1. Replace the faulty fuel temperature sensor if it is found to be malfunctioning.
2. Repair any damaged wiring or connectors related to the fuel temperature sensor circuit.
3. Ensure proper insulation and shielding of the sensor wiring to prevent interference from external factors.
4. Clear the fault codes using a diagnostic scanner after completing the repairs.

How to erase DTC P0168 on BMW

To erase DTC P0168 on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the ECM. After addressing the underlying issue causing the code, you can reset the system by following these steps:

1. Connect the diagnostic scanner to the OBD-II port of the vehicle.
2. Select the option to erase fault codes from the ECM memory.
3. Follow the on-screen prompts to complete the code clearing process.
4. Verify that the DTC P0168 code has been successfully erased by rescanning the system.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.