BMW DTC P0175 – System Too Rich (Bank 2)
DTC P0175 meaning on BMW
The DTC P0175 code on a BMW indicates that the engine control module (ECM) has detected a fuel system too rich condition on Bank 2. This means that there is an excessive amount of fuel being injected into the cylinders on the Bank 2 side of the engine, leading to a rich air-fuel mixture.
BMW DTC P0175 symptoms
Symptoms of a DTC P0175 on a BMW may include:
- Check Engine Light (CEL) illuminated
- Decreased fuel efficiency
- Rough idling or stalling
- Black smoke from the exhaust
- Strong fuel odor
BMW DTC P0175 causes
Common causes of a DTC P0175 on a BMW include:
- Faulty oxygen sensor
- Dirty or clogged fuel injectors
- Leaking fuel injectors
- Issues with the fuel pressure regulator
- Vacuum leaks
- Faulty mass airflow sensor (MAF)
BMW DTC P0175 seriousness
While a DTC P0175 may not cause immediate engine failure, it can lead to decreased fuel efficiency, increased emissions, and potential damage to the catalytic converter over time if left unresolved. It is important to address this issue promptly to prevent further complications.
How to diagnose DTC P0175 on BMW
To diagnose a DTC P0175 on a BMW, a mechanic may perform the following steps:
- Use a scan tool to retrieve the DTC and freeze frame data
- Inspect the oxygen sensors for proper operation
- Check the fuel injectors for leaks or clogs
- Inspect the air intake system for vacuum leaks
- Test the fuel pressure and regulator
- Check the MAF sensor for proper function
How to fix DTC P0175 on BMW
To fix a DTC P0175 on a BMW, the following steps may be taken:
- Replace faulty oxygen sensors
- Clean or replace clogged fuel injectors
- Repair or replace leaking fuel injectors
- Address issues with the fuel pressure regulator
- Fix any vacuum leaks in the intake system
- Replace a faulty MAF sensor
How to erase DTC P0175 on BMW
After fixing the underlying issue causing the DTC P0175 on a BMW, the code can be cleared using a scan tool. This will reset the Check Engine Light and erase the diagnostic trouble code from the ECM’s memory. It is important to ensure that the repair has been successful before clearing the code.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.