P01BC – BMW DTC

BMW DTC P01BC – Engine Oil Temperature Sensor ‘B’ Circuit High

DTC P01BC meaning on BMW

The DTC P01BC fault code on a BMW indicates an issue with the Engine Oil Temperature Sensor ‘B’ Circuit registering a high voltage signal. This sensor is responsible for monitoring the temperature of the engine oil, providing crucial data for the engine control unit to adjust various parameters for optimal performance.

BMW DTC P01BC symptoms

Symptoms of the DTC P01BC code on a BMW may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Inaccurate engine oil temperature readings on the gauge
• Engine running hotter or colder than normal
• Reduced engine performance or efficiency

BMW DTC P01BC causes

Common causes of the DTC P01BC code on a BMW include:

• Faulty Engine Oil Temperature Sensor ‘B’
• Wiring or connector issues in the sensor circuit
• Engine control module (ECM) software glitches

BMW DTC P01BC seriousness

While the DTC P01BC code may not cause immediate drivability issues, it is important to address it promptly to prevent potential long-term engine damage. Ignoring this fault could lead to incorrect engine oil temperature readings, which may affect engine performance and longevity.

How to diagnose DTC P01BC on BMW

To diagnose the DTC P01BC code on a BMW, follow these steps:

1. Use an OBD-II scanner to retrieve the fault codes stored in the vehicle’s ECM.
2. Inspect the wiring and connectors related to the Engine Oil Temperature Sensor ‘B’ for any visible damage or corrosion.
3. Test the resistance and voltage of the sensor to determine if it is functioning correctly.
4. Check for any software updates or recalibrations available for the ECM.

How to fix DTC P01BC on BMW

To fix the DTC P01BC code on a BMW, consider the following steps:

1. Replace the Engine Oil Temperature Sensor ‘B’ if it is found to be faulty.
2. Repair or replace any damaged wiring or connectors in the sensor circuit.
3. If applicable, update the ECM software to the latest version to address any known issues.

How to erase DTC P01BC on BMW

To erase the DTC P01BC code on a BMW, you can:

1. Use an OBD-II scanner to clear the fault codes stored in the ECM.
2. After addressing the underlying issue causing the fault code, reset the ECM by disconnecting the vehicle’s battery for a few minutes.
3. Ensure that the issue has been resolved by driving the vehicle and checking for any reoccurrence of the fault code.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.