BMW DTC P01E5 – Engine Coolant Temperature Sensor 3 Circuit Low
DTC P01E5 meaning on BMW
The DTC P01E5 error code on a BMW indicates an issue with the Engine Coolant Temperature Sensor 3 Circuit registering a low voltage signal. This sensor is responsible for monitoring the engine coolant temperature and providing data to the engine control module.
BMW DTC P01E5 symptoms
Symptoms of the BMW DTC P01E5 may include:
- Check Engine Light illuminated on the dashboard
- Inaccurate temperature readings on the dashboard
- Engine running hotter or colder than normal
- Potential decrease in fuel efficiency
BMW DTC P01E5 causes
Common causes of the BMW DTC P01E5 error code include:
- Defective Engine Coolant Temperature Sensor 3
- Wiring or connector issues in the sensor circuit
- Corrosion or poor connections in the sensor circuit
- Engine control module (ECM) malfunction
BMW DTC P01E5 seriousness
While the BMW DTC P01E5 error code may not cause immediate drivability issues, it is important to address it promptly to prevent potential engine damage or performance issues. Ignoring this code could lead to incorrect temperature readings and affect the engine’s operation.
How to diagnose DTC P01E5 on BMW
To diagnose the BMW DTC P01E5 error code, a mechanic may perform the following steps:
- Use a diagnostic scanner to retrieve the fault code and freeze frame data
- Inspect the Engine Coolant Temperature Sensor 3 and its wiring for any visible damage or corrosion
- Test the sensor’s resistance and voltage output to determine if it is functioning correctly
- Check the ECM for any stored codes related to the coolant temperature sensor
How to fix DTC P01E5 on BMW
To fix the BMW DTC P01E5 error code, the following steps may be taken:
- Replace the Engine Coolant Temperature Sensor 3 if it is found to be faulty
- Repair any damaged wiring or connectors in the sensor circuit
- Clean any corrosion in the sensor circuit connections
- If necessary, reprogram or replace the engine control module (ECM)
How to erase DTC P01E5 on BMW
To erase the DTC P01E5 error code on a BMW, the following steps can be followed:
- Use a diagnostic scanner to clear the fault code from the ECM’s memory
- After making any necessary repairs, drive the vehicle to allow the ECM to relearn the sensor data
- Ensure that the Check Engine Light does not reappear after clearing the code
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.