P01E7 – BMW DTC

BMW DTC P01E7 – Engine Coolant Temperature Sensor 3 Circuit Intermittent

DTC P01E7 meaning on BMW

The DTC P01E7 error code on a BMW indicates an intermittent issue with the Engine Coolant Temperature Sensor 3 circuit. This sensor is responsible for monitoring the temperature of the engine coolant and providing this data to the engine control module for proper engine operation.

BMW DTC P01E7 symptoms

Symptoms of the DTC P01E7 code on a BMW may include:

• Check Engine Light illuminated on the dashboard
• Inaccurate temperature readings on the coolant gauge
• Engine running hotter or colder than normal
• Poor fuel efficiency

BMW DTC P01E7 causes

Common causes of the DTC P01E7 code on a BMW include:

• Faulty Engine Coolant Temperature Sensor 3
• Wiring or connector issues in the sensor circuit
• Corrosion or poor connections in the sensor circuit
• Intermittent electrical problems

BMW DTC P01E7 seriousness

While the DTC P01E7 code may not cause immediate drivability issues, it is important to address this problem promptly to prevent potential engine damage or reduced fuel efficiency. Ignoring this code could lead to overheating or other engine-related problems.

How to diagnose DTC P01E7 on BMW

To diagnose the DTC P01E7 code on a BMW, a mechanic may perform the following steps:

1. Use a diagnostic scanner to retrieve the fault codes and freeze frame data
2. Inspect the Engine Coolant Temperature Sensor 3 and its wiring for any visible damage or corrosion
3. Test the sensor’s resistance and voltage readings to determine if it is functioning correctly
4. Check for any loose or damaged connections in the sensor circuit

How to fix DTC P01E7 on BMW

To fix the DTC P01E7 code on a BMW, the following steps may be taken:

1. Replace the Engine Coolant Temperature Sensor 3 if it is found to be faulty
2. Repair or replace any damaged wiring or connectors in the sensor circuit
3. Clean any corrosion from the sensor connections
4. Clear the fault codes and perform a test drive to ensure the issue has been resolved

How to erase DTC P01E7 on BMW

To erase the DTC P01E7 code on a BMW, follow these steps:

1. Use a diagnostic scanner to clear the fault codes from the engine control module
2. Perform a test drive to ensure the code does not return
3. If the code reappears, further diagnosis and repairs may be necessary

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.