P01F1 – BMW DTC

BMW DTC P01F1 – O2 Sensor Circuit Bank 1 Sensor 4

DTC P01F1 meaning on BMW

The DTC P01F1 code on a BMW indicates an issue with the O2 sensor circuit for Bank 1 Sensor 4. This code specifically points to a problem with the oxygen sensor located in the fourth position on the first bank of the engine.

BMW DTC P01F1 symptoms

Symptoms of a DTC P01F1 code on a BMW may include:

  • Check Engine Light illuminated
  • Poor fuel economy
  • Engine running rough or misfiring
  • Reduced engine performance

BMW DTC P01F1 causes

Common causes of a DTC P01F1 code on a BMW include:

  • Failed O2 sensor Bank 1 Sensor 4
  • Wiring or connector issues in the O2 sensor circuit
  • Exhaust leaks near the sensor
  • Engine running rich or lean

BMW DTC P01F1 seriousness

The seriousness of a DTC P01F1 code on a BMW should not be ignored. Ignoring this code can lead to poor engine performance, reduced fuel efficiency, and potential damage to the catalytic converter over time.

How to diagnose DTC P01F1 on BMW

To diagnose a DTC P01F1 code on a BMW, you can:

  • Use a scan tool to read the code and any associated freeze frame data
  • Inspect the wiring and connectors in the O2 sensor circuit
  • Check for exhaust leaks near the sensor
  • Perform a visual inspection of the O2 sensor Bank 1 Sensor 4

How to fix DTC P01F1 on BMW

To fix a DTC P01F1 code on a BMW, you may need to:

  • Replace the O2 sensor Bank 1 Sensor 4
  • Repair any damaged wiring or connectors in the circuit
  • Address any exhaust leaks near the sensor
  • Ensure the engine is running at the correct air-fuel ratio

How to erase DTC P01F1 on BMW

To erase a DTC P01F1 code on a BMW, you can:

  • Use a scan tool to clear the code after the underlying issue has been resolved
  • Ensure the repair has been completed successfully before clearing the code
  • Drive the vehicle to allow the system to run its diagnostic checks

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.