BMW DTC P01F2 – O2 Sensor Circuit Low Voltage Bank 1 Sensor 4
DTC P01F2 meaning on BMW
The DTC P01F2 code on a BMW indicates an issue with the O2 sensor circuit for Bank 1 Sensor 4. This code specifically points to a low voltage condition being detected by the O2 sensor in that location.
BMW DTC P01F2 symptoms
Symptoms of the DTC P01F2 code on a BMW may include:
- Check Engine Light illuminated on the dashboard
- Poor fuel economy
- Engine running rough or misfiring
- Reduced engine performance
BMW DTC P01F2 causes
Common causes of the DTC P01F2 code on a BMW include:
- Faulty O2 sensor Bank 1 Sensor 4
- Wiring or connector issues in the O2 sensor circuit
- Exhaust leaks near the O2 sensor
- Engine running rich or lean conditions
BMW DTC P01F2 seriousness
The DTC P01F2 code should not be ignored as it can lead to poor engine performance and potentially cause damage to other components if left unresolved. It is recommended to address this issue promptly to prevent further complications.
How to diagnose DTC P01F2 on BMW
To diagnose the DTC P01F2 code on a BMW, you can follow these steps:
- Use an OBD-II scanner to retrieve the specific fault code
- Inspect the wiring and connectors related to Bank 1 Sensor 4
- Check for any exhaust leaks near the O2 sensor
- Perform a visual inspection of the O2 sensor for any physical damage
How to fix DTC P01F2 on BMW
To fix the DTC P01F2 code on a BMW, you can try the following solutions:
- Replace the faulty O2 sensor Bank 1 Sensor 4
- Repair any damaged wiring or connectors in the O2 sensor circuit
- Address any exhaust leaks near the O2 sensor
- Ensure the engine is running at the correct air-fuel ratio
How to erase DTC P01F2 on BMW
To erase the DTC P01F2 code on a BMW, you can use an OBD-II scanner to clear the code after the underlying issue has been resolved. Once the code is cleared, the Check Engine Light should turn off if the problem has been successfully fixed.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.