BMW DTC P01FE – Turbocharger Outlet Pressure Sensor ‘B’ Intermittent/Erratic
DTC P01FE meaning on BMW
The DTC P01FE code on a BMW indicates an intermittent or erratic signal from the Turbocharger Outlet Pressure Sensor ‘B’. This sensor is responsible for monitoring the pressure at the outlet of the turbocharger.
BMW DTC P01FE symptoms
Symptoms of the DTC P01FE code on a BMW may include:
- Check Engine Light illuminated
- Reduced engine performance
- Increased fuel consumption
- Turbocharger-related issues
BMW DTC P01FE causes
Common causes of the DTC P01FE code on a BMW include:
- Faulty Turbocharger Outlet Pressure Sensor ‘B’
- Wiring or connector issues
- Intermittent electrical connection
- Software or calibration issues
BMW DTC P01FE seriousness
The DTC P01FE code should not be ignored as it can lead to reduced engine performance and potential damage to the turbocharger system. It is recommended to address this issue promptly to prevent further complications.
How to diagnose DTC P01FE on BMW
To diagnose the DTC P01FE code on a BMW, you can perform the following steps:
- Use a diagnostic scanner to retrieve the fault codes
- Inspect the Turbocharger Outlet Pressure Sensor ‘B’ and its wiring for any visible damage
- Check the sensor’s signal using a multimeter
- Verify the sensor’s operation by comparing its readings to specifications
How to fix DTC P01FE on BMW
To fix the DTC P01FE code on a BMW, you can try the following solutions:
- Replace the Turbocharger Outlet Pressure Sensor ‘B’ if it is found to be faulty
- Repair any damaged wiring or connectors associated with the sensor
- Perform a software update or calibration if necessary
- Clear the fault codes and test drive the vehicle to ensure the issue is resolved
How to erase DTC P01FE on BMW
To erase the DTC P01FE code on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the vehicle’s ECU. Once the codes are cleared, you can reset the Check Engine Light and monitor the vehicle for any recurring issues.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.