DTClookup.com

Search DTC

P0200 – BMW DTC

BMW DTC P0200 – Injector Circuit/Open

DTC P0200 meaning on BMW

The Diagnostic Trouble Code (DTC) P0200 for BMW indicates an issue with the injector circuit being open. This means that the Engine Control Module (ECM) has detected a lack of continuity or a high resistance in the circuit that controls the fuel injector for a specific cylinder.

BMW DTC P0200 symptoms

Symptoms of a DTC P0200 on a BMW may include:

  • Engine misfires
  • Rough idling
  • Decreased fuel efficiency
  • Lack of power
  • Check Engine Light (CEL) illuminated

BMW DTC P0200 causes

Common causes of a DTC P0200 on a BMW include:

  • Faulty fuel injector
  • Open or short circuit in the injector wiring
  • Corrosion or poor connections in the injector circuit
  • Defective Engine Control Module (ECM)

BMW DTC P0200 seriousness

Ignoring a DTC P0200 on a BMW can lead to potential engine performance issues, decreased fuel efficiency, and possible damage to the catalytic converter over time. It is important to address this issue promptly to prevent further complications.

How to diagnose DTC P0200 on BMW

To diagnose a DTC P0200 on a BMW, you can perform the following steps:

  1. Use a diagnostic scanner to retrieve the fault codes and identify the specific cylinder affected.
  2. Inspect the injector wiring harness for any signs of damage, corrosion, or loose connections.
  3. Test the fuel injector resistance using a multimeter to check for proper continuity.
  4. Check the ECM for any stored codes related to injector circuit faults.

How to fix DTC P0200 on BMW

To fix a DTC P0200 on a BMW, you can try the following solutions:

  1. Replace the faulty fuel injector if it is determined to be the cause of the issue.
  2. Repair any damaged or corroded wiring in the injector circuit.
  3. Clean and secure any loose connections in the injector wiring harness.
  4. If necessary, replace the Engine Control Module (ECM) if it is found to be defective.

How to erase DTC P0200 on BMW

To erase a DTC P0200 on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the ECM. After addressing the underlying issue causing the fault code, clearing the code will reset the Check Engine Light and monitor the system for any recurring problems.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

← All BMW Diagnostic Trouble Codes

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.