P027A – BMW DTC

BMW DTC P027A – Fuel Pump Module ‘B’ Control Circuit/Open

DTC P027A meaning on BMW

The Diagnostic Trouble Code (DTC) P027A for BMW refers to a fault in the Fuel Pump Module ‘B’ Control Circuit, indicating an open circuit condition. This means that there is an interruption in the electrical circuit that controls the fuel pump module ‘B’ in the vehicle.

BMW DTC P027A symptoms

Symptoms associated with the BMW DTC P027A may include:

• Check Engine Light (MIL) illuminated on the dashboard
• Engine stalling or hesitation during acceleration
• Reduced engine performance or power
• Difficulty starting the vehicle

BMW DTC P027A causes

Common causes of the BMW DTC P027A include:

• Open or short circuit in the wiring harness connected to the fuel pump module ‘B’
• Defective fuel pump module ‘B’
• Faulty fuel pump relay
• Issues with the engine control module (ECM)

BMW DTC P027A seriousness

The BMW DTC P027A should be addressed promptly as it can lead to drivability issues and potential engine damage if left unresolved. Ignoring this fault may result in the vehicle not starting or stalling unexpectedly, posing a safety risk.

How to diagnose DTC P027A on BMW

To diagnose the DTC P027A on a BMW, follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s ECM
2. Inspect the wiring harness connected to the fuel pump module ‘B’ for any visible damage or corrosion
3. Test the fuel pump module ‘B’ and fuel pump relay for proper operation
4. Check the ECM for any faults or programming issues

How to fix DTC P027A on BMW

To fix the DTC P027A on a BMW, consider the following steps:

1. Repair or replace any damaged wiring harness connected to the fuel pump module ‘B’
2. Replace the faulty fuel pump module ‘B’ if necessary
3. Test and replace the fuel pump relay if it is found to be defective
4. Address any issues with the ECM by reprogramming or replacing it

How to erase DTC P027A on BMW

To erase the DTC P027A on a BMW, you can:

1. Use a diagnostic scanner to clear the fault codes stored in the ECM
2. After making the necessary repairs, perform a test drive to ensure the issue is resolved
3. If the fault code does not reappear, the DTC P027A has been successfully erased

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.