P0283 – BMW DTC

BMW DTC P0283 – Cylinder 8 Injector ‘A’ Circuit High

DTC P0283 meaning on BMW

The Diagnostic Trouble Code (DTC) P0283 for BMW indicates an issue with the Cylinder 8 Injector ‘A’ Circuit High. This means that the Engine Control Module (ECM) has detected a high voltage condition in the circuit related to the fuel injector for cylinder 8.

BMW DTC P0283 symptoms

Symptoms of DTC P0283 on a BMW may include:

• Check Engine Light illuminated
• Engine misfires
• Reduced engine performance
• Increased fuel consumption

BMW DTC P0283 causes

Common causes of DTC P0283 on a BMW include:

• Faulty fuel injector for cylinder 8
• Wiring or connector issues in the injector circuit
• ECM software or hardware problems

BMW DTC P0283 seriousness

Ignoring DTC P0283 on a BMW can lead to potential engine performance issues, increased fuel consumption, and possible damage to the catalytic converter. It is important to address this issue promptly to prevent further damage to the vehicle.

How to diagnose DTC P0283 on BMW

To diagnose DTC P0283 on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scan tool to retrieve the fault code and freeze frame data
2. Inspect the wiring and connectors related to the cylinder 8 fuel injector
3. Test the fuel injector for proper operation
4. Check for any ECM software updates or reprogramming

How to fix DTC P0283 on BMW

To fix DTC P0283 on a BMW, the following steps may be taken:

1. Replace the faulty fuel injector for cylinder 8
2. Repair any damaged wiring or connectors in the injector circuit
3. If necessary, reprogram or replace the ECM

How to erase DTC P0283 on BMW

To erase DTC P0283 on a BMW, the fault code can be cleared using a diagnostic scan tool. After the repair has been completed, the code can be cleared to reset the Check Engine Light and monitor the system for any recurring issues.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.