P02C3 – BMW DTC

BMW DTC P02C3 – Cylinder 11 – Fuel Trim at Min Limit

DTC P02C3 meaning on BMW

The DTC P02C3 code on a BMW indicates that there is a fuel trim at the minimum limit detected in cylinder 11. This means that the engine control module (ECM) has detected that the fuel mixture in cylinder 11 is running too lean, causing the fuel trim to reach its minimum threshold.

BMW DTC P02C3 symptoms

Symptoms of the DTC P02C3 code on a BMW may include:

  • Check Engine Light (CEL) illuminated on the dashboard
  • Decreased engine performance
  • Engine misfires
  • Rough idling
  • Reduced fuel efficiency

BMW DTC P02C3 causes

The common causes of the DTC P02C3 code on a BMW include:

  • Vacuum leaks
  • Faulty oxygen sensor
  • Dirty or clogged fuel injectors
  • Fuel pump issues
  • Intake air leaks

BMW DTC P02C3 seriousness

Ignoring the DTC P02C3 code on a BMW can lead to potential engine damage and decreased fuel efficiency. It is important to address this issue promptly to prevent further complications and ensure optimal engine performance.

How to diagnose DTC P02C3 on BMW

To diagnose the DTC P02C3 code on a BMW, a mechanic may perform the following steps:

  • Use a diagnostic scanner to retrieve the fault codes
  • Inspect the vacuum lines for leaks
  • Check the oxygen sensor for proper functioning
  • Clean or replace the fuel injectors if necessary
  • Test the fuel pump for proper pressure
  • Inspect the intake system for any leaks

How to fix DTC P02C3 on BMW

To fix the DTC P02C3 code on a BMW, the following steps may be taken:

  • Repair any vacuum leaks in the system
  • Replace the faulty oxygen sensor
  • Clean or replace clogged fuel injectors
  • Address any fuel pump issues
  • Fix any intake air leaks
  • Clear the fault codes and reset the ECM

How to erase DTC P02C3 on BMW

To erase the DTC P02C3 code on a BMW, a mechanic can use a diagnostic scanner to clear the fault codes stored in the ECM. Once the repairs have been made and the underlying issue has been addressed, the fault codes can be cleared to reset the system and turn off the Check Engine Light.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.