P0306 – BMW DTC

BMW DTC P0306 – Cylinder 6 Misfire Detected

DTC P0306 meaning on BMW

DTC P0306 on a BMW indicates a misfire has been detected in cylinder 6 of the engine. This means that the engine control module (ECM) has detected that cylinder 6 is not contributing as expected to the overall engine performance.

BMW DTC P0306 symptoms

Symptoms of a DTC P0306 on a BMW may include:

• Engine misfiring or running rough
• Loss of power or acceleration
• Increased fuel consumption
• Check Engine Light (CEL) illuminated

BMW DTC P0306 causes

Common causes of a DTC P0306 on a BMW include:

• Ignition system issues such as faulty spark plugs or ignition coils
• Fuel system problems like clogged fuel injectors or low fuel pressure
• Vacuum leaks in the intake system
• Engine mechanical problems such as low compression in cylinder 6

BMW DTC P0306 seriousness

Ignoring a DTC P0306 on a BMW can lead to further engine damage and decreased fuel efficiency. It is important to address this issue promptly to prevent potential long-term damage to the engine.

How to diagnose DTC P0306 on BMW

To diagnose a DTC P0306 on a BMW, you can perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and confirm it is P0306.
2. Inspect the ignition system components such as spark plugs and ignition coils for signs of wear or damage.
3. Check the fuel system for issues like clogged injectors or low fuel pressure.
4. Perform a compression test on cylinder 6 to check for any mechanical problems.

How to fix DTC P0306 on BMW

To fix a DTC P0306 on a BMW, you can try the following solutions:

1. Replace faulty spark plugs or ignition coils in cylinder 6.
2. Clean or replace clogged fuel injectors.
3. Address any vacuum leaks in the intake system.
4. Repair any engine mechanical issues causing the misfire.

How to erase DTC P0306 on BMW

After fixing the underlying issue causing the DTC P0306 on a BMW, you can erase the fault code using a diagnostic scanner. Clearing the code will reset the Check Engine Light and allow you to monitor the system for any recurring issues.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.