P0332 – BMW DTC

BMW DTC P0332 – Knock/Combustion Vibration Sensor 2 Circuit Low (Bank 2)

DTC P0332 meaning on BMW

The DTC P0332 code on a BMW indicates a problem with the Knock/Combustion Vibration Sensor 2 Circuit on Bank 2. This sensor is responsible for detecting engine knocking or vibrations that could potentially cause damage to the engine.

BMW DTC P0332 symptoms

Symptoms of a DTC P0332 on a BMW may include:

• Engine knocking or pinging noises
• Reduced engine performance
• Check Engine Light (CEL) illuminated on the dashboard
• Engine misfires

BMW DTC P0332 causes

Common causes of a DTC P0332 on a BMW include:

• Faulty Knock/Combustion Vibration Sensor 2
• Wiring issues or poor connections in the sensor circuit
• Engine mechanical problems causing abnormal vibrations

BMW DTC P0332 seriousness

Ignoring a DTC P0332 on a BMW can lead to potential engine damage and reduced performance. It is important to address this issue promptly to prevent further complications.

How to diagnose DTC P0332 on BMW

To diagnose a DTC P0332 on a BMW, you can follow these steps:

1. Use a diagnostic scanner to retrieve the fault code
2. Inspect the Knock/Combustion Vibration Sensor 2 and its wiring for any visible damage
3. Check for loose connections or corrosion in the sensor circuit
4. Perform a sensor resistance test to determine if it is functioning properly

How to fix DTC P0332 on BMW

To fix a DTC P0332 on a BMW, you can try the following:

1. Replace the Knock/Combustion Vibration Sensor 2 if it is found to be faulty
2. Repair any damaged wiring or connections in the sensor circuit
3. Clear the fault code using a diagnostic scanner after the repair
4. Test drive the vehicle to ensure the issue has been resolved

How to erase DTC P0332 on BMW

To erase a DTC P0332 on a BMW, you can use a diagnostic scanner to clear the fault code from the vehicle’s ECU memory. Make sure the underlying issue has been addressed before clearing the code to prevent it from reoccurring.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.