P0356 – BMW DTC

BMW DTC P0356 – Ignition Coil ‘F’ Primary Control Circuit/Open

DTC P0356 meaning on BMW

The Diagnostic Trouble Code (DTC) P0356 for BMW indicates a malfunction in the ignition coil ‘F’ primary control circuit. This means that the Engine Control Module (ECM) has detected an open circuit or a lack of continuity in the primary control circuit of the ignition coil assigned to cylinder ‘F’.

BMW DTC P0356 symptoms

Symptoms associated with DTC P0356 on a BMW may include:

• Engine misfires
• Rough idling
• Loss of power
• Check Engine Light (CEL) illuminated on the dashboard

BMW DTC P0356 causes

The common causes of DTC P0356 on a BMW are:

• Defective ignition coil ‘F’
• Open or short circuit in the wiring harness connected to the ignition coil ‘F’
• Faulty Engine Control Module (ECM)

BMW DTC P0356 seriousness

Ignoring DTC P0356 on a BMW can lead to potential engine performance issues, such as increased fuel consumption, further damage to the ignition system, and ultimately engine stalling. It is recommended to address this issue promptly to prevent more severe problems.

How to diagnose DTC P0356 on BMW

To diagnose DTC P0356 on a BMW, you can follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the ECM.
2. Inspect the wiring harness connected to the ignition coil ‘F’ for any signs of damage or corrosion.
3. Test the continuity of the primary control circuit of the ignition coil ‘F’ using a multimeter.
4. If necessary, perform a resistance test on the ignition coil ‘F’ to check for proper functioning.

How to fix DTC P0356 on BMW

To fix DTC P0356 on a BMW, you can consider the following actions:

1. Replace the faulty ignition coil ‘F’ with a new one.
2. Repair or replace any damaged wiring in the circuit connected to the ignition coil ‘F’.
3. If the ECM is determined to be faulty, it may need to be reprogrammed or replaced.

How to erase DTC P0356 on BMW

To erase DTC P0356 on a BMW, you can:

1. Use a diagnostic scanner to clear the fault codes stored in the ECM.
2. After performing the necessary repairs, drive the vehicle to allow the ECM to relearn the system and verify that the issue has been resolved.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.