P0366 – BMW DTC

BMW DTC P0366 – Camshaft Position Sensor ‘B’ Circuit Range/Performance (Bank 1)

DTC P0366 meaning on BMW

The DTC P0366 code on a BMW indicates an issue with the Camshaft Position Sensor ‘B’ Circuit Range/Performance on Bank 1. This means that the signal from the camshaft position sensor ‘B’ is not within the expected range or is not performing as it should.

BMW DTC P0366 symptoms

Symptoms of a DTC P0366 on a BMW may include:

  • Check Engine Light illuminated
  • Engine running rough or misfiring
  • Reduced engine performance
  • Poor fuel economy

BMW DTC P0366 causes

Common causes of a DTC P0366 on a BMW include:

  • Faulty camshaft position sensor ‘B’
  • Wiring or connector issues in the camshaft position sensor circuit
  • Engine timing out of sync

BMW DTC P0366 seriousness

The seriousness of a DTC P0366 on a BMW depends on the underlying cause. Ignoring this issue can lead to further engine problems and potential damage if left unresolved. It is recommended to address this code promptly to prevent any long-term issues.

How to diagnose DTC P0366 on BMW

To diagnose a DTC P0366 on a BMW, you can follow these steps:

  1. Use a diagnostic scanner to retrieve the fault code
  2. Inspect the camshaft position sensor ‘B’ and its wiring for any visible damage
  3. Check the engine timing to ensure it is in sync
  4. Perform a continuity test on the sensor circuit

How to fix DTC P0366 on BMW

To fix a DTC P0366 on a BMW, you can try the following:

  1. Replace the faulty camshaft position sensor ‘B’
  2. Repair any damaged wiring or connectors in the sensor circuit
  3. Reset the engine timing if necessary

How to erase DTC P0366 on BMW

To erase a DTC P0366 on a BMW, you can use a diagnostic scanner to clear the fault code from the vehicle’s memory. Once the issue has been addressed and fixed, you can reset the code to turn off the Check Engine Light.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.