P0368 – BMW DTC

BMW DTC P0368 – Camshaft Position Sensor ‘B’ Circuit High (Bank 1)

DTC P0368 meaning on BMW

The Diagnostic Trouble Code (DTC) P0368 for BMW indicates an issue with the Camshaft Position Sensor ‘B’ Circuit High on Bank 1. This means that the signal from the camshaft position sensor on bank 1 is registering a voltage higher than the specified range.

BMW DTC P0368 symptoms

Symptoms of DTC P0368 on a BMW may include:

• Check Engine Light illuminated on the dashboard
• Engine running rough or misfiring
• Decreased fuel efficiency
• Engine stalling or difficulty starting

BMW DTC P0368 causes

Common causes of DTC P0368 on a BMW include:

• Faulty camshaft position sensor
• Wiring or connector issues in the camshaft position sensor circuit
• Engine timing out of sync
• ECU (Engine Control Unit) software issues

BMW DTC P0368 seriousness

While DTC P0368 may not always result in immediate drivability issues, it is important to address this problem promptly. Ignoring this fault can lead to further engine performance problems and potential damage over time.

How to diagnose DTC P0368 on BMW

To diagnose DTC P0368 on a BMW, you can follow these steps:

1. Use an OBD-II scanner to retrieve the fault code and check for any additional codes.
2. Inspect the wiring and connectors related to the camshaft position sensor for any visible damage or corrosion.
3. Test the camshaft position sensor using a multimeter to check for proper voltage and resistance.
4. Verify the engine timing is correct and in sync with the camshaft position sensor readings.

How to fix DTC P0368 on BMW

To fix DTC P0368 on a BMW, you can try the following solutions:

1. Replace the faulty camshaft position sensor with a new OEM part.
2. Repair any damaged wiring or connectors in the camshaft position sensor circuit.
3. Reset the ECU and perform a relearn procedure to recalibrate the camshaft position sensor.
4. Ensure the engine timing is correctly set according to manufacturer specifications.

How to erase DTC P0368 on BMW

To erase DTC P0368 on a BMW, you can use an OBD-II scanner to clear the fault code after addressing the underlying issue. Once the problem has been fixed, clearing the code will reset the Check Engine Light and allow the system to monitor for any new faults.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.