BMW DTC P03AB – Cylinder 3 Pressure Sensor Circuit Low
DTC P03AB meaning on BMW
The DTC P03AB fault code on a BMW indicates an issue with the Cylinder 3 Pressure Sensor Circuit registering a low voltage signal. This sensor is responsible for monitoring the pressure within cylinder 3 of the engine. When the voltage signal from the sensor falls below the specified threshold, the DTC P03AB is triggered.
BMW DTC P03AB symptoms
Symptoms associated with the BMW DTC P03AB may include:
- Check Engine Light (MIL) illuminated on the dashboard
- Engine running rough or misfiring
- Reduced engine performance
- Possible engine stalling
BMW DTC P03AB causes
The common causes of the BMW DTC P03AB fault code include:
- Malfunctioning Cylinder 3 Pressure Sensor
- Wiring or connector issues in the sensor circuit
- Low engine oil level or pressure
- Internal engine problems affecting cylinder 3
BMW DTC P03AB seriousness
Ignoring the BMW DTC P03AB fault code can lead to potential engine damage or poor performance. It is important to address this issue promptly to prevent further complications and ensure the proper functioning of the engine.
How to diagnose DTC P03AB on BMW
To diagnose the DTC P03AB on a BMW, a mechanic may perform the following steps:
- Use a diagnostic scanner to retrieve the fault code and related data
- Inspect the wiring and connectors in the Cylinder 3 Pressure Sensor circuit
- Test the Cylinder 3 Pressure Sensor for proper operation
- Check the engine oil level and pressure
- Conduct a compression test on cylinder 3
How to fix DTC P03AB on BMW
To fix the DTC P03AB on a BMW, the following steps may be taken:
- Replace the faulty Cylinder 3 Pressure Sensor
- Repair or replace any damaged wiring or connectors in the sensor circuit
- Address any issues with low engine oil level or pressure
- Repair internal engine problems affecting cylinder 3
How to erase DTC P03AB on BMW
After fixing the underlying issue causing the DTC P03AB on a BMW, the fault code can be erased using a diagnostic scanner. This will clear the code from the vehicle’s memory and turn off the Check Engine Light. It is important to ensure that the repair has been successful before clearing the fault code.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.