P0443 – BMW DTC

BMW DTC P0443 – EVAP System Purge Control Valve ‘A’ Circuit

DTC P0443 meaning on BMW

The Diagnostic Trouble Code (DTC) P0443 for BMW refers to a malfunction in the EVAP (Evaporative Emission Control) System Purge Control Valve ‘A’ Circuit. This code indicates that there is an electrical fault in the circuit controlling the purge valve, which is responsible for managing the flow of fuel vapors from the charcoal canister to the engine intake manifold.

BMW DTC P0443 symptoms

Symptoms of a DTC P0443 on a BMW may include:

• Check Engine Light (MIL) illuminated on the dashboard
• Increased fuel consumption
• Rough idling or stalling
• Strong fuel odor near the vehicle

BMW DTC P0443 causes

Common causes of a DTC P0443 on a BMW include:

• Faulty EVAP purge control valve
• Open or short circuit in the wiring connected to the purge valve
• Corrosion or poor connections in the electrical system
• Defective Engine Control Module (ECM)

BMW DTC P0443 seriousness

While a DTC P0443 may not cause immediate drivability issues, it can lead to increased emissions and reduced fuel efficiency. Ignoring this code can also result in potential damage to other emission control components over time.

How to diagnose DTC P0443 on BMW

To diagnose a DTC P0443 on a BMW, you can perform the following steps:

1. Use an OBD-II scanner to retrieve the specific fault code
2. Inspect the wiring and connectors related to the EVAP purge control valve for any visible damage or corrosion
3. Test the purge control valve for proper operation using a multimeter
4. Check the ECM for any stored codes or pending faults

How to fix DTC P0443 on BMW

To fix a DTC P0443 on a BMW, you can try the following solutions:

1. Replace the faulty EVAP purge control valve
2. Repair or replace any damaged wiring or connectors in the circuit
3. Clean or replace the charcoal canister if contaminated with fuel
4. Reset the ECM and clear the fault code after completing repairs

How to erase DTC P0443 on BMW

To erase a DTC P0443 on a BMW, you can use an OBD-II scanner to clear the fault code from the ECM’s memory. After making the necessary repairs and ensuring the issue is resolved, you can reset the system and verify that the code does not return.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.