P0450 – BMW DTC

BMW DTC P0450 – EVAP System Pressure Sensor/Switch ‘A’ Circuit

DTC P0450 meaning on BMW

DTC P0450 on a BMW indicates a fault with the EVAP (Evaporative Emission Control) System Pressure Sensor/Switch ‘A’ Circuit. This code is triggered when the ECM (Engine Control Module) detects a malfunction in the sensor or its circuit.

BMW DTC P0450 symptoms

Symptoms of DTC P0450 in a BMW may include:

• Check Engine Light illuminated
• Issues with fuel economy
• Problems with the vehicle’s emissions
• Difficulty starting the engine

BMW DTC P0450 causes

Common causes of DTC P0450 on a BMW include:

• Faulty EVAP System Pressure Sensor/Switch
• Wiring or connector issues in the sensor circuit
• EVAP system leaks
• Defective ECM

BMW DTC P0450 seriousness

While DTC P0450 may not cause immediate drivability issues, it is important to address this code promptly. Ignoring this fault can lead to increased emissions, reduced fuel efficiency, and potential long-term damage to the vehicle’s emissions control system.

How to diagnose DTC P0450 on BMW

To diagnose DTC P0450 on a BMW, you can perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and freeze frame data
2. Inspect the EVAP System Pressure Sensor/Switch and its wiring for any visible damage
3. Check for leaks in the EVAP system using a smoke machine
4. Test the sensor’s resistance and voltage readings

How to fix DTC P0450 on BMW

To fix DTC P0450 on a BMW, you can try the following solutions:

1. Replace the EVAP System Pressure Sensor/Switch if faulty
2. Repair any damaged wiring or connectors in the sensor circuit
3. Address any leaks in the EVAP system
4. If necessary, replace the ECM

How to erase DTC P0450 on BMW

To erase DTC P0450 on a BMW, you can use a diagnostic scanner to clear the fault code from the ECM’s memory. After fixing the underlying issue, clearing the code will reset the Check Engine Light and monitor the system for any new faults.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.