P047D – BMW DTC

BMW DTC P047D – Exhaust Pressure Sensor ‘B’ Circuit High

DTC P047D meaning on BMW

DTC P047D on a BMW indicates a fault with the Exhaust Pressure Sensor ‘B’ circuit. This fault code is triggered when the Engine Control Module (ECM) detects a high voltage signal from the exhaust pressure sensor ‘B’, which is typically located in the exhaust system.

BMW DTC P047D symptoms

Symptoms of a DTC P047D on a BMW may include:

• Check Engine Light illuminated
• Reduced engine performance
• Increased fuel consumption
• Smoke from the exhaust

BMW DTC P047D causes

Common causes of a DTC P047D on a BMW include:

• Faulty exhaust pressure sensor ‘B’
• Wiring or connector issues in the sensor circuit
• Exhaust system leaks
• ECM software issues

BMW DTC P047D seriousness

While a DTC P047D may not cause immediate drivability issues, it can lead to reduced engine performance and increased emissions. Ignoring this fault code can potentially cause further damage to the engine or exhaust system over time.

How to diagnose DTC P047D on BMW

To diagnose a DTC P047D on a BMW, you can perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and freeze frame data
2. Inspect the wiring and connectors related to the exhaust pressure sensor ‘B’
3. Check the sensor for proper operation and signal output
4. Perform a smoke test to check for exhaust leaks

How to fix DTC P047D on BMW

To fix a DTC P047D on a BMW, you can try the following solutions:

1. Replace the faulty exhaust pressure sensor ‘B’
2. Repair any damaged wiring or connectors in the sensor circuit
3. Fix any exhaust leaks in the system
4. Update the ECM software if necessary

How to erase DTC P047D on BMW

To erase a DTC P047D on a BMW, you can use a diagnostic scanner to clear the fault code from the ECM’s memory. After fixing the underlying issue that caused the fault code, you can then reset the ECM and ensure the code does not return.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.