BMW DTC P0495 – Fan Speed High
DTC P0495 meaning on BMW
The DTC P0495 code on a BMW indicates that the engine control module (ECM) has detected that the electric cooling fan control circuit is experiencing a high voltage condition. This typically means that the cooling fan is running at a higher speed than expected by the ECM.
BMW DTC P0495 symptoms
Symptoms of a DTC P0495 on a BMW may include:
- Check Engine Light illuminated on the dashboard
- Increased fan noise coming from the engine compartment
- Overheating of the engine due to improper cooling fan operation
BMW DTC P0495 causes
The common causes of a DTC P0495 on a BMW include:
- Defective cooling fan motor
- Faulty cooling fan relay
- Wiring issues in the cooling fan circuit
- ECM software glitch
BMW DTC P0495 seriousness
While a DTC P0495 may not cause immediate drivability issues, it is important to address this code promptly to prevent potential engine overheating and damage. Ignoring this code can lead to more severe problems in the long run.
How to diagnose DTC P0495 on BMW
To diagnose a DTC P0495 on a BMW, you can perform the following steps:
- Use a diagnostic scanner to retrieve the fault codes stored in the ECM.
- Inspect the cooling fan motor and relay for any visible damage or signs of malfunction.
- Check the wiring harness and connectors in the cooling fan circuit for loose connections or corrosion.
- Test the cooling fan operation by applying power directly to the fan to see if it spins at the correct speed.
How to fix DTC P0495 on BMW
To fix a DTC P0495 on a BMW, you can try the following solutions:
- Replace the cooling fan motor if it is found to be faulty.
- Replace the cooling fan relay if it is not functioning properly.
- Repair any damaged wiring or connectors in the cooling fan circuit.
- Update the ECM software to address any software glitches causing the high fan speed condition.
How to erase DTC P0495 on BMW
To erase a DTC P0495 on a BMW, you can use a diagnostic scanner to clear the fault code from the ECM’s memory. After fixing the underlying issue causing the code, clearing the code will reset the Check Engine Light and ensure that the system is operating correctly.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.