P0498 – BMW DTC

BMW DTC P0498 – EVAP System Vent Valve Control Circuit Low

DTC P0498 meaning on BMW

DTC P0498 on a BMW indicates a low voltage condition in the control circuit of the Evaporative Emission (EVAP) System Vent Valve. The Engine Control Module (ECM) monitors this circuit to ensure proper operation of the EVAP system, which helps reduce harmful emissions from the vehicle.

BMW DTC P0498 symptoms

Symptoms of DTC P0498 on a BMW may include:

• Check Engine Light illuminated on the dashboard
• Decreased fuel efficiency
• Issues with the vehicle’s emission control system

BMW DTC P0498 causes

Common causes of DTC P0498 on a BMW include:

• Faulty EVAP System Vent Valve
• Wiring or connector issues in the control circuit
• ECM software or hardware problems

BMW DTC P0498 seriousness

While DTC P0498 may not cause immediate drivability issues, it is important to address this fault to ensure proper operation of the EVAP system and maintain compliance with emissions regulations. Ignoring this fault could lead to increased emissions and potential long-term damage to the vehicle’s components.

How to diagnose DTC P0498 on BMW

To diagnose DTC P0498 on a BMW, a mechanic may perform the following steps:

1. Use a diagnostic scan tool to retrieve the fault code and freeze frame data
2. Inspect the EVAP System Vent Valve and its wiring for any visible damage or corrosion
3. Check the control circuit for proper voltage and continuity
4. Perform a smoke test to check for leaks in the EVAP system

How to fix DTC P0498 on BMW

To fix DTC P0498 on a BMW, the following steps may be taken:

1. Replace the faulty EVAP System Vent Valve if necessary
2. Repair any damaged wiring or connectors in the control circuit
3. Update the ECM software if recommended by the manufacturer
4. Clear the fault code and perform a test drive to ensure the issue is resolved

How to erase DTC P0498 on BMW

To erase DTC P0498 on a BMW, follow these steps:

1. Use a diagnostic scan tool to clear the fault code from the ECM memory
2. Perform a test drive to ensure the fault code does not return
3. If the fault code reappears, further diagnosis and repairs may be necessary

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.