P04C0 – BMW DTC

BMW DTC P04C0 – Fuel Fill Door Unlock Control Range/Performance

DTC P04C0 meaning on BMW

The DTC P04C0 code on a BMW indicates a fault with the Fuel Fill Door Unlock Control system. This code specifically points to a range/performance issue, suggesting that the control module is not receiving the expected signal or response related to unlocking the fuel fill door.

BMW DTC P04C0 symptoms

Symptoms of the DTC P04C0 code on a BMW may include:

• Difficulty or inability to unlock the fuel fill door
• Warning light on the dashboard related to the fuel fill door
• Malfunctioning fuel fill door release mechanism

BMW DTC P04C0 causes

Common causes of the DTC P04C0 code on a BMW include:

• Defective fuel fill door unlock control module
• Wiring or connection issues in the fuel fill door unlock circuit
• Faulty fuel fill door release actuator

BMW DTC P04C0 seriousness

While the DTC P04C0 code may not directly affect the drivability of the vehicle, it is important to address this issue promptly. A malfunctioning fuel fill door unlock control system can lead to inconvenience and potential safety concerns, especially if the fuel fill door cannot be opened when needed.

How to diagnose DTC P04C0 on BMW

To diagnose the DTC P04C0 code on a BMW, a mechanic may perform the following steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s computer
2. Inspect the fuel fill door unlock control module for any visible damage or signs of malfunction
3. Check the wiring and connections in the fuel fill door unlock circuit for any issues
4. Test the fuel fill door release actuator for proper operation

How to fix DTC P04C0 on BMW

To fix the DTC P04C0 code on a BMW, the following steps may be taken:

1. Replace the faulty fuel fill door unlock control module
2. Repair or replace any damaged wiring or connections in the fuel fill door unlock circuit
3. Replace the defective fuel fill door release actuator
4. Clear the fault codes using a diagnostic scanner after the repairs have been completed

How to erase DTC P04C0 on BMW

To erase the DTC P04C0 code on a BMW, follow these steps:

1. Use a diagnostic scanner to access the vehicle’s computer system
2. Select the option to clear or erase fault codes
3. Follow the on-screen prompts to confirm the deletion of the DTC P04C0 code
4. Once the code has been successfully cleared, verify that the issue has been resolved by checking for any reoccurring fault codes

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.