P04D1 – BMW DTC

BMW DTC P04D1 – EGR Temperature Sensor ‘C’ Circuit High

DTC P04D1 meaning on BMW

The Diagnostic Trouble Code (DTC) P04D1 for BMW refers to the EGR (Exhaust Gas Recirculation) Temperature Sensor ‘C’ Circuit High. This code indicates that the engine control module (ECM) has detected a high voltage signal from the EGR temperature sensor ‘C’, which is used to monitor the temperature of the exhaust gas recirculation system.

BMW DTC P04D1 symptoms

Symptoms of the BMW DTC P04D1 may include:

• Check Engine Light (MIL) illuminated
• Reduced engine performance
• Increased fuel consumption
• Potential rough idling or stalling

BMW DTC P04D1 causes

Common causes of the BMW DTC P04D1 may include:

• Failed EGR temperature sensor ‘C’
• Wiring or connector issues in the EGR temperature sensor circuit
• ECM software or hardware problems

BMW DTC P04D1 seriousness

While the BMW DTC P04D1 may not cause immediate drivability issues, it is important to address this code promptly to prevent potential damage to the EGR system and ensure optimal engine performance and emissions control.

How to diagnose DTC P04D1 on BMW

To diagnose the DTC P04D1 on a BMW, you can perform the following steps:

1. Use a diagnostic scan tool to retrieve the fault codes and freeze frame data
2. Inspect the EGR temperature sensor ‘C’ and its wiring for any visible damage or corrosion
3. Test the EGR temperature sensor ‘C’ using a multimeter to check for proper resistance values
4. Check the ECM for any software updates or reprogramming requirements

How to fix DTC P04D1 on BMW

To fix the DTC P04D1 on a BMW, you can try the following solutions:

1. Replace the EGR temperature sensor ‘C’ if it is found to be faulty
2. Repair any damaged wiring or connectors in the EGR temperature sensor circuit
3. Clear the fault codes using a diagnostic scan tool after completing the repairs
4. If the issue persists, consult a professional mechanic for further diagnosis and repair

How to erase DTC P04D1 on BMW

To erase the DTC P04D1 on a BMW, you can follow these steps:

1. Connect a diagnostic scan tool to the vehicle’s OBD-II port
2. Select the option to clear the fault codes from the ECM memory
3. Follow the on-screen prompts to confirm the deletion of the DTC P04D1
4. Once the fault code is cleared, start the vehicle and ensure the Check Engine Light is no longer illuminated

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.