P051D – BMW DTC

BMW DTC P051D – Crankcase Pressure Sensor Circuit High

DTC P051D meaning on BMW

The DTC P051D error code on BMW vehicles indicates an issue with the crankcase pressure sensor circuit registering a high voltage signal. The Engine Control Module (ECM) monitors the crankcase pressure sensor to ensure proper engine performance and emissions control.

BMW DTC P051D symptoms

Symptoms of the DTC P051D code on a BMW may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Reduced engine performance or power
• Increased fuel consumption
• Engine stalling or rough idling

BMW DTC P051D causes

Common causes of the DTC P051D code on BMW vehicles include:

• Faulty crankcase pressure sensor
• Wiring or connector issues in the sensor circuit
• ECM software or hardware problems

BMW DTC P051D seriousness

While the DTC P051D code may not always result in immediate drivability issues, it is essential to address the problem promptly to prevent potential engine damage or further complications. Ignoring the code can lead to reduced engine efficiency and increased emissions.

How to diagnose DTC P051D on BMW

To diagnose the DTC P051D code on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the ECM
2. Inspect the crankcase pressure sensor and its wiring for any visible damage or corrosion
3. Test the sensor’s voltage output using a multimeter to verify its functionality
4. Check for any loose connections or shorts in the sensor circuit

How to fix DTC P051D on BMW

To fix the DTC P051D code on a BMW, the following steps may be taken:

1. Replace the faulty crankcase pressure sensor with a new OEM part
2. Repair or replace any damaged wiring or connectors in the sensor circuit
3. Clear the fault codes using a diagnostic scanner after completing the repairs
4. Perform a test drive to ensure the issue has been resolved

How to erase DTC P051D on BMW

To erase the DTC P051D code on a BMW, follow these steps:

1. Connect a diagnostic scanner to the vehicle’s OBD-II port
2. Select the ¨Erase Codes¨ or ¨Clear Codes¨ function on the scanner
3. Follow the on-screen prompts to confirm the deletion of the fault codes
4. Once the process is complete, disconnect the scanner and start the engine to ensure the code has been successfully cleared

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.