P051E – BMW DTC

BMW DTC P051E – Crankcase Pressure Sensor Circuit Intermittent/Erratic

DTC P051E meaning on BMW

DTC P051E for BMW refers to a fault with the Crankcase Pressure Sensor Circuit that is intermittent or erratic. This diagnostic trouble code indicates that there is an issue with the sensor responsible for monitoring the pressure within the crankcase of the engine.

BMW DTC P051E symptoms

Symptoms of DTC P051E on a BMW may include:

• Check Engine Light illuminated
• Engine running rough
• Decreased fuel efficiency
• Engine stalling or hesitation

BMW DTC P051E causes

Common causes of DTC P051E on a BMW include:

• Faulty crankcase pressure sensor
• Wiring or connector issues in the sensor circuit
• Intermittent electrical connection problems

BMW DTC P051E seriousness

While DTC P051E may not cause immediate drivability issues, it is important to address this fault to prevent potential engine performance problems and ensure proper emissions control.

How to diagnose DTC P051E on BMW

To diagnose DTC P051E on a BMW, follow these steps:

1. Use a diagnostic scanner to retrieve the fault code
2. Inspect the crankcase pressure sensor and its wiring for any visible damage
3. Check the sensor’s electrical connections for proper contact
4. Perform a sensor test using a multimeter to verify functionality

How to fix DTC P051E on BMW

To fix DTC P051E on a BMW, consider the following:

1. Replace the faulty crankcase pressure sensor if necessary
2. Repair any damaged wiring or connectors in the sensor circuit
3. Ensure all electrical connections are secure and free of corrosion
4. Clear the fault code and perform a test drive to confirm the issue is resolved

How to erase DTC P051E on BMW

To erase DTC P051E on a BMW, use a diagnostic scanner to clear the fault code from the vehicle’s engine control module. Once the code is cleared, perform a test drive to ensure the issue has been resolved.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.