BMW DTC P055F – Engine Oil Pressure Out of Range
DTC P055F meaning on BMW
DTC P055F on a BMW indicates that the Engine Oil Pressure is out of range. This means that the oil pressure in the engine is either too high or too low, which can lead to potential engine damage if not addressed promptly.
BMW DTC P055F symptoms
Symptoms of DTC P055F on a BMW may include:
- Check Engine Light illuminated on the dashboard
- Engine running rough or misfiring
- Loss of power or acceleration
- Engine overheating
- Unusual engine noises
BMW DTC P055F causes
The common causes of DTC P055F on a BMW include:
- Low engine oil level
- Faulty oil pressure sensor
- Clogged oil filter
- Worn-out oil pump
- Engine oil viscosity issues
BMW DTC P055F seriousness
DTC P055F is a serious issue that should not be ignored. Low oil pressure can lead to engine damage due to inadequate lubrication, while high oil pressure can cause leaks or component failure. It is crucial to address this fault promptly to prevent further damage to the engine.
How to diagnose DTC P055F on BMW
To diagnose DTC P055F on a BMW, a mechanic would typically perform the following steps:
- Use a diagnostic scanner to retrieve the fault code
- Inspect the engine oil level and condition
- Check the oil pressure sensor for proper operation
- Inspect the oil filter and oil pump for any issues
- Perform a manual oil pressure test to verify the actual oil pressure
How to fix DTC P055F on BMW
To fix DTC P055F on a BMW, the following steps may be taken:
- Top up the engine oil to the correct level
- Replace the faulty oil pressure sensor
- Change the oil filter and perform an oil change if necessary
- Inspect and replace the oil pump if it is worn out
- Ensure the engine oil viscosity is correct for the vehicle
How to erase DTC P055F on BMW
After fixing the underlying issue causing DTC P055F on a BMW, the fault code can be erased using a diagnostic scanner. The scanner can clear the code from the vehicle’s computer system, resetting the Check Engine Light. It is important to ensure that the issue has been properly addressed before clearing the fault code.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.