P05C5 – BMW DTC

BMW DTC P05C5 – Engine Coolant Pressure Sensor Circuit High

DTC P05C5 meaning on BMW

DTC P05C5 on a BMW indicates a fault with the Engine Coolant Pressure Sensor Circuit registering a high voltage signal. The Engine Control Module (ECM) monitors the coolant pressure sensor to ensure the cooling system is functioning within specified parameters.

BMW DTC P05C5 symptoms

Symptoms of a DTC P05C5 on a BMW may include:

• Check Engine Light illuminated
• Engine overheating
• Loss of coolant
• Reduced engine performance

BMW DTC P05C5 causes

Common causes of a DTC P05C5 on a BMW include:

• Faulty Engine Coolant Pressure Sensor
• Wiring or connector issues in the coolant pressure sensor circuit
• ECM software or hardware problems

BMW DTC P05C5 seriousness

Ignoring a DTC P05C5 on a BMW can lead to potential engine damage due to overheating or loss of coolant. It is important to address this issue promptly to prevent further complications.

How to diagnose DTC P05C5 on BMW

To diagnose a DTC P05C5 on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and freeze frame data
2. Inspect the coolant pressure sensor and its wiring for any visible damage
3. Test the sensor’s resistance and voltage output
4. Check the ECM for any related faults

How to fix DTC P05C5 on BMW

To fix a DTC P05C5 on a BMW, the following steps may be taken:

1. Replace the faulty Engine Coolant Pressure Sensor
2. Repair any damaged wiring or connectors in the sensor circuit
3. Clear the fault code and perform a test drive to ensure the issue is resolved

How to erase DTC P05C5 on BMW

To erase a DTC P05C5 on a BMW, a diagnostic scanner can be used to clear the fault code from the ECM’s memory. After the repair has been completed, the code can be erased to reset the Check Engine Light and ensure the issue has been resolved.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.