P05D6 – BMW DTC

BMW DTC P05D6 – Driver Mode Select Switch ‘B’ Circuit High

DTC P05D6 meaning on BMW

The Diagnostic Trouble Code (DTC) P05D6 for BMW refers to the Driver Mode Select Switch ‘B’ Circuit High. This code indicates that there is a high voltage condition detected in the circuit related to the driver mode select switch ‘B’.

BMW DTC P05D6 symptoms

Symptoms of the BMW DTC P05D6 may include:

• Check Engine Light (MIL) illuminated on the dashboard
• Driver mode select switch not functioning properly
• Loss of control over driver mode settings

BMW DTC P05D6 causes

Common causes of the BMW DTC P05D6 include:

• Faulty driver mode select switch ‘B’
• Short circuit or open circuit in the wiring related to the switch
• Corrosion or poor connections in the switch circuit

BMW DTC P05D6 seriousness

The seriousness of the BMW DTC P05D6 lies in the potential loss of functionality of the driver mode select switch, which can impact the driver’s ability to control certain vehicle settings. While the vehicle may still be operable, it is important to address this issue to ensure proper functionality and potentially prevent further damage to the vehicle’s systems.

How to diagnose DTC P05D6 on BMW

To diagnose the DTC P05D6 on a BMW, you can follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s computer
2. Inspect the driver mode select switch ‘B’ and its wiring for any visible damage or corrosion
3. Perform a continuity test on the switch circuit to check for any open or short circuits

How to fix DTC P05D6 on BMW

To fix the DTC P05D6 on a BMW, you can consider the following actions:

1. Replace the faulty driver mode select switch ‘B’ if necessary
2. Repair any damaged wiring or connections in the switch circuit
3. Clean any corrosion from the switch contacts and ensure proper connections

How to erase DTC P05D6 on BMW

To erase the DTC P05D6 on a BMW, you can:

1. Use a diagnostic scanner to clear the fault codes from the vehicle’s computer
2. After making any necessary repairs, reset the system by disconnecting the vehicle’s battery for a few minutes
3. Reconnect the battery and start the vehicle to ensure the fault code has been successfully cleared

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.