P0656 – BMW DTC

BMW DTC P0656 – Fuel Level Output Circuit

DTC P0656 meaning on BMW

DTC P0656 on a BMW indicates a fault in the fuel level output circuit. This diagnostic trouble code is triggered when the Engine Control Module (ECM) detects a discrepancy in the signal from the fuel level sensor.

BMW DTC P0656 symptoms

Symptoms of DTC P0656 on a BMW may include:

• Inaccurate fuel level readings on the dashboard
• Check Engine Light (CEL) illuminated
• Issues with fuel gauge operation

BMW DTC P0656 causes

Common causes of DTC P0656 on a BMW include:

• Defective fuel level sensor
• Wiring or connector issues in the fuel level circuit
• ECM malfunction

BMW DTC P0656 seriousness

While DTC P0656 is not a critical issue that affects the drivability of the vehicle, it can lead to inaccurate fuel level readings, potentially causing inconvenience to the driver. It is recommended to address this issue to ensure proper monitoring of fuel levels.

How to diagnose DTC P0656 on BMW

To diagnose DTC P0656 on a BMW, follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes.
2. Inspect the fuel level sensor and its wiring for any visible damage or corrosion.
3. Check the fuel level sensor’s resistance using a multimeter to ensure it is within specifications.
4. Test the fuel level sensor signal at the ECM connector to verify proper voltage and continuity.

How to fix DTC P0656 on BMW

To fix DTC P0656 on a BMW, consider the following steps:

1. Replace the faulty fuel level sensor if it is found to be defective.
2. Repair any damaged wiring or connectors in the fuel level circuit.
3. If the ECM is determined to be the issue, reprogram or replace it as necessary.

How to erase DTC P0656 on BMW

To erase DTC P0656 on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the ECM memory. After addressing the underlying issue causing the fault code, clearing the code will reset the Check Engine Light and allow for monitoring of the system for any recurring issues.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.