BMW DTC P06C4 – Cylinder 12 Glow Plug Circuit Range/Performance
DTC P06C4 meaning on BMW
The DTC P06C4 for BMW indicates a fault in the cylinder 12 glow plug circuit, specifically related to range/performance issues. This fault code is triggered when the Engine Control Module (ECM) detects that the glow plug circuit in cylinder 12 is operating outside the expected parameters.
BMW DTC P06C4 symptoms
Symptoms of the DTC P06C4 in a BMW may include:
- Hard starting or extended cranking time
- Rough idling or misfiring
- Reduced engine performance
- Illumination of the Check Engine Light
BMW DTC P06C4 causes
Common causes of the DTC P06C4 in a BMW include:
- Defective glow plug in cylinder 12
- Wiring or connection issues in the glow plug circuit
- Faulty Engine Control Module (ECM)
BMW DTC P06C4 seriousness
While the DTC P06C4 may not cause immediate drivability issues, it is important to address this fault promptly to prevent potential long-term damage to the engine and emissions system. Ignoring this fault code can lead to decreased fuel efficiency and increased emissions.
How to diagnose DTC P06C4 on BMW
To diagnose the DTC P06C4 on a BMW, you can follow these steps:
- Use a diagnostic scanner to retrieve the fault code and freeze frame data.
- Inspect the glow plug in cylinder 12 for proper operation and continuity.
- Check the wiring and connections in the glow plug circuit for any damage or corrosion.
- Perform a resistance test on the glow plug to determine if it is within specifications.
- Test the Engine Control Module (ECM) for proper functioning.
How to fix DTC P06C4 on BMW
To fix the DTC P06C4 on a BMW, you can consider the following actions:
- Replace the faulty glow plug in cylinder 12.
- Repair any damaged wiring or connections in the glow plug circuit.
- If the Engine Control Module (ECM) is faulty, it may need to be reprogrammed or replaced.
- Clear the fault code and perform a test drive to ensure the issue has been resolved.
How to erase DTC P06C4 on BMW
To erase the DTC P06C4 on a BMW, you can use a diagnostic scanner to clear the fault code from the Engine Control Module (ECM) memory. After clearing the code, it is recommended to perform a test drive to verify that the fault code does not return.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.