BMW DTC P06C6 – Cylinder 2 Glow Plug Incorrect
DTC P06C6 meaning on BMW
The DTC P06C6 code on a BMW indicates that there is an issue with the glow plug in cylinder 2. Glow plugs are used in diesel engines to help with cold starts by heating the air in the combustion chamber. When the Engine Control Module (ECM) detects that the glow plug in cylinder 2 is not functioning correctly, it triggers the P06C6 fault code.
BMW DTC P06C6 symptoms
Symptoms of a DTC P06C6 code on a BMW may include:
- Hard starting, especially in cold weather
- Rough idling
- Decreased fuel efficiency
- Engine misfires
BMW DTC P06C6 causes
The most common causes of a DTC P06C6 code on a BMW are:
- Failed glow plug in cylinder 2
- Wiring or connection issues related to the glow plug
- Faulty Engine Control Module (ECM)
BMW DTC P06C6 seriousness
While a DTC P06C6 code may not cause immediate drivability issues, it is important to address it promptly to avoid potential starting and performance problems, especially in cold weather conditions. Ignoring the issue could lead to further damage to the engine or emissions system.
How to diagnose DTC P06C6 on BMW
To diagnose a DTC P06C6 code on a BMW, a mechanic would typically perform the following steps:
- Use a diagnostic scanner to retrieve the fault code and any related codes
- Inspect the glow plug in cylinder 2 for signs of damage or failure
- Check the wiring and connections to the glow plug for any issues
- Test the glow plug and related components for proper functionality
How to fix DTC P06C6 on BMW
To fix a DTC P06C6 code on a BMW, the following steps may be taken:
- Replace the glow plug in cylinder 2 if it is found to be faulty
- Repair any wiring or connection issues related to the glow plug
- If necessary, replace the Engine Control Module (ECM)
- Clear the fault codes and test the vehicle to ensure the issue has been resolved
How to erase DTC P06C6 on BMW
To erase a DTC P06C6 code on a BMW, the fault codes can be cleared using a diagnostic scanner. After the necessary repairs have been made, the ECM can be reset to clear the code. It is important to ensure that the underlying issue causing the fault code has been addressed before clearing the code to prevent it from reoccurring.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.