BMW DTC P06CC – Cylinder 8 Glow Plug Incorrect
DTC P06CC meaning on BMW
The Diagnostic Trouble Code (DTC) P06CC for BMW indicates an issue with the glow plug in cylinder 8. Glow plugs are used in diesel engines to help with cold starts by heating the combustion chamber. When this code appears, it means that there is an incorrect signal detected from the glow plug in cylinder 8.
BMW DTC P06CC symptoms
Symptoms of the DTC P06CC in a BMW may include:
- Hard starting, especially in cold weather
- Rough idling
- Decreased fuel efficiency
- Engine misfires
BMW DTC P06CC causes
The common causes of the DTC P06CC in a BMW include:
- Defective glow plug in cylinder 8
- Wiring issues or poor electrical connections
- Faulty glow plug control module
- Software issues in the engine control unit (ECU)
BMW DTC P06CC seriousness
While the DTC P06CC may not cause immediate drivability issues, it is important to address this problem promptly. Ignoring glow plug issues can lead to more severe problems, such as engine damage or decreased performance.
How to diagnose DTC P06CC on BMW
To diagnose the DTC P06CC on a BMW, you can follow these steps:
- Use a diagnostic scanner to read the fault codes and identify the specific cylinder affected.
- Inspect the glow plug in cylinder 8 for any physical damage or signs of wear.
- Check the wiring and connections related to the glow plug for any issues.
- Test the glow plug control module for proper functionality.
How to fix DTC P06CC on BMW
To fix the DTC P06CC on a BMW, you can consider the following steps:
- Replace the glow plug in cylinder 8 if it is found to be faulty.
- Repair any damaged wiring or connections related to the glow plug.
- If the glow plug control module is defective, replace it with a new one.
- Clear the fault codes using a diagnostic scanner after completing the repairs.
How to erase DTC P06CC on BMW
To erase the DTC P06CC on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the ECU. After addressing the underlying issue causing the fault code, clearing the code will reset the system and turn off the Check Engine Light.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.