P06D3 – BMW DTC

BMW DTC P06D3 – Sensor Reference Voltage ‘E’ Circuit Low

DTC P06D3 meaning on BMW

The Diagnostic Trouble Code (DTC) P06D3 for BMW refers to the Sensor Reference Voltage ‘E’ Circuit Low. This code indicates that the voltage signal from the sensor reference circuit ‘E’ is below the expected range, causing a potential issue with the sensor’s operation.

BMW DTC P06D3 symptoms

Symptoms associated with the BMW DTC P06D3 may include:

• Check Engine Light (MIL) illuminated on the dashboard
• Reduced engine performance or power
• Engine stalling or rough idling
• Difficulty starting the vehicle

BMW DTC P06D3 causes

Common causes of the BMW DTC P06D3 include:

• Faulty sensor reference voltage circuit ‘E’
• Short circuit or open circuit in the sensor reference voltage wiring
• Defective sensor or sensor connector
• Issues with the Engine Control Module (ECM)

BMW DTC P06D3 seriousness

The seriousness of the BMW DTC P06D3 code depends on the underlying cause. Ignoring this code can lead to potential engine performance issues, reduced fuel efficiency, and possible damage to engine components. It is recommended to address this code promptly to prevent further complications.

How to diagnose DTC P06D3 on BMW

To diagnose the DTC P06D3 on a BMW, follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the ECM.
2. Inspect the sensor reference voltage circuit ‘E’ for any visible damage or loose connections.
3. Test the sensor and its wiring for continuity and proper voltage levels.
4. Check the ECM for any signs of malfunction or communication errors.

How to fix DTC P06D3 on BMW

To fix the DTC P06D3 on a BMW, consider the following steps:

1. Repair or replace any damaged wiring in the sensor reference voltage circuit ‘E’.
2. Inspect and replace the sensor if found to be faulty.
3. Clean or replace the sensor connector to ensure a secure connection.
4. If necessary, reprogram or replace the ECM to address any internal faults.

How to erase DTC P06D3 on BMW

To erase the DTC P06D3 on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the ECM. After addressing the underlying issue causing the code, clearing the codes will reset the Check Engine Light and verify if the problem has been resolved successfully.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.