BMW DTC P06DC – Engine Oil Pressure Control Circuit High
DTC P06DC meaning on BMW
The DTC P06DC fault code on BMW vehicles indicates a high signal from the engine oil pressure control circuit. This means that the engine oil pressure control system is detecting a higher than expected voltage, which can lead to issues with oil pressure regulation.
BMW DTC P06DC symptoms
Symptoms of the DTC P06DC code on a BMW may include:
- Check Engine Light illuminated on the dashboard
- Engine running rough or misfiring
- Loss of power or acceleration
- Engine stalling or shutting off unexpectedly
BMW DTC P06DC causes
The high signal in the engine oil pressure control circuit that triggers the DTC P06DC code on BMW vehicles can be caused by various factors, including:
- Faulty oil pressure sensor
- Wiring or connector issues in the oil pressure control circuit
- Low engine oil level or poor quality oil
- Problems with the oil pump or oil pressure regulator
BMW DTC P06DC seriousness
Ignoring the DTC P06DC fault code on a BMW can lead to serious engine damage due to improper oil pressure regulation. Driving with high oil pressure can cause excessive wear on engine components and potentially result in engine failure.
How to diagnose DTC P06DC on BMW
To diagnose the DTC P06DC code on a BMW, a mechanic would typically perform the following steps:
- Use a diagnostic scanner to retrieve the fault codes and data from the vehicle’s engine control module
- Inspect the oil pressure sensor and its wiring for any visible damage or corrosion
- Check the engine oil level and quality to ensure it meets manufacturer specifications
- Test the oil pressure using a mechanical gauge to verify the actual pressure readings
How to fix DTC P06DC on BMW
Fixing the DTC P06DC code on a BMW typically involves the following steps:
- Replace the faulty oil pressure sensor if it is found to be defective
- Repair any damaged wiring or connectors in the oil pressure control circuit
- Ensure the engine oil level is correct and of the recommended quality
- Inspect and, if necessary, replace the oil pump or oil pressure regulator
How to erase DTC P06DC on BMW
After fixing the underlying issue causing the DTC P06DC code on a BMW, the fault code can be cleared using a diagnostic scanner. This will reset the Check Engine Light and erase the code from the engine control module’s memory.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.