P06F5 – BMW DTC

BMW DTC P06F5 – Glow Plug Control Module 2

DTC P06F5 meaning on BMW

The DTC P06F5 fault code on BMW vehicles indicates an issue with Glow Plug Control Module 2. This module is responsible for controlling the glow plugs, which are used to preheat the combustion chamber in diesel engines for easier starting in cold conditions.

BMW DTC P06F5 symptoms

Symptoms of the DTC P06F5 Glow Plug Control Module 2 fault may include:

• Engine misfires or rough idling
• Difficulty starting the engine, especially in cold weather
• Reduced engine performance
• Illuminated Check Engine Light

BMW DTC P06F5 causes

Common causes of the DTC P06F5 fault code on BMW vehicles include:

• Defective Glow Plug Control Module 2
• Wiring or connection issues
• Faulty glow plugs
• Software or programming issues

BMW DTC P06F5 seriousness

Ignoring the DTC P06F5 fault code can lead to potential starting issues, reduced engine performance, and increased emissions. It is recommended to address this fault promptly to prevent further damage to the engine or related components.

How to diagnose DTC P06F5 on BMW

To diagnose the DTC P06F5 fault code on a BMW, a diagnostic scan tool capable of reading BMW specific codes is required. The following steps can help in diagnosing the issue:

1. Perform a full system scan to retrieve the fault codes
2. Check the glow plug control module for any visible damage or signs of malfunction
3. Inspect the wiring and connections related to the glow plug system
4. Test the glow plugs for proper functionality

How to fix DTC P06F5 on BMW

To fix the DTC P06F5 fault code on a BMW, the following steps can be taken:

1. Replace the Glow Plug Control Module 2 if it is found to be faulty
2. Repair any damaged wiring or connections in the glow plug system
3. Replace any faulty glow plugs
4. Update the software or programming if necessary

How to erase DTC P06F5 on BMW

After addressing the underlying issue causing the DTC P06F5 fault code on a BMW, the code can be cleared using a diagnostic scan tool. Follow these steps to erase the fault code:

1. Connect the diagnostic scan tool to the vehicle’s OBD-II port
2. Navigate to the code clearing function on the scan tool
3. Follow the on-screen prompts to clear the DTC P06F5 fault code
4. Verify that the fault code has been successfully erased

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.