P0713 – BMW DTC

BMW DTC P0713 – Transmission Fluid Temperature Sensor ‘A’ Circuit High

DTC P0713 meaning on BMW

DTC P0713 on a BMW indicates a fault with the Transmission Fluid Temperature Sensor ‘A’ Circuit. This code is triggered when the Powertrain Control Module (PCM) detects that the transmission fluid temperature sensor signal is higher than the expected range.

BMW DTC P0713 symptoms

Symptoms of DTC P0713 on a BMW may include:

  • Check Engine Light illuminated
  • Transmission shifting issues
  • Overheating transmission

BMW DTC P0713 causes

Common causes of DTC P0713 on a BMW include:

  • Faulty transmission fluid temperature sensor
  • Wiring or connector issues in the sensor circuit
  • Low transmission fluid level
  • Internal transmission problems

BMW DTC P0713 seriousness

While DTC P0713 may not always result in immediate drivability issues, it is important to address this code promptly to prevent potential transmission damage or performance issues.

How to diagnose DTC P0713 on BMW

To diagnose DTC P0713 on a BMW, a mechanic may perform the following steps:

  1. Use a diagnostic scanner to retrieve the fault code and freeze frame data
  2. Inspect the transmission fluid temperature sensor and its wiring for any visible damage
  3. Check the transmission fluid level and condition
  4. Perform a resistance test on the sensor to determine if it is within specifications

How to fix DTC P0713 on BMW

To fix DTC P0713 on a BMW, the following steps may be taken:

  1. Replace the faulty transmission fluid temperature sensor
  2. Repair any damaged wiring or connectors in the sensor circuit
  3. Ensure the transmission fluid level is correct and top up if necessary
  4. If internal transmission issues are found, further diagnosis and repair may be required

How to erase DTC P0713 on BMW

To erase DTC P0713 on a BMW, the fault code can be cleared using a diagnostic scanner. After the repair has been made, the code can be reset to see if the issue has been resolved. It is important to verify that the repair was successful by checking for the return of the fault code.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.